Uploaded January 2026 | Updated September 2026, 50 minutes ago

---

Going through the full milling process to get a board square on four sides, S4S, using the jointer, table saw and planer on the wood for the next project! I rough cut the board at the miter saw and roughly ripped it to width with a 20T ripping blade to quickly get through the material. One face and one edge were squared at the jointer, while the opposite face was planed parallel to the jointed face. Finally, I switched out to a 40T blade, for a finer cut quality, to rip the last edge perfectly square. Check out these tools on our website -

SawStop 5hp ICS Table Saw - toolstoday.com/sawstop-ics51230-52-5hp-1ph-230v-60hz-industrial-cabinet-saw-with-52-industrial-t-glide-fence-system.html

Amana Tool 20T Ripping Blade - toolstoday.com/v-4926-rb1020.html

SawStop Overarm Dust Collection - toolstoday.com/sawstop-tsg-fdc-floating-overarm-dust-collection-guard.html

Bow Products Mini PushPro Stick - toolstoday.com/bow-products-pp2-mini-pushpro-push-stick.html

Jet 8" JT1-1373 Helical Head Jointer - toolstoday.com/jet-black-8-inch-helical-head-jointer-2-hp-1ph-230v

MicroJig GRR-RIP Block - toolstoday.com/microjig-grr-rip-block-smart-pushblock.html

Laguna C-Flux 1.5hp Dust Collector - toolstoday.com/laguna-mdccf15110-c-flux-1.html

JET 13" helical head planer - toolstoday.com/jet-722130-jwp-13bt-13-inch-planer-with-helical-style-head.html

Amana Tool 40T General Purpose Blade - toolstoday.com/v-7194-pr1040.html

Woodpeckers Mini in-DEXABLE Double Square - toolstoday.com/woodpeckers-mdsq-21-mini-in-dexable-double-square-4-inch-blade-includes-rack-it.html


#short #shorts

** Subscribe - youtube.com/user/toolstoday

** Shop the website - http://www.toolstoday.coms