Uploaded September 2026 | Updated September 2026, 3 hours ago

---

Making a logo out of acrylic. All CNC work was done on the Axiom AR8 CNC machine. I started off cutting the black acrylic with the item no. 51441-K 1/16" diameter Spektra ™ spiral O flute upcut bit. The pockets were cut in the orange acrylic using the item no. 51404-K 1/4" diameter Spektra ™ spiral O flute upcut bit and followed up with the 1/16" bit to create the correct radius for the pieces to fit into. Check out the tools used on our website!
- - - - - - -
RPM: 18,000
Feed Rate: 1/16"-60ipm 1/4"-120ipm
Plunge Rate: 1/16"- 30ipm 1/4"- 60ipm
Depth per pass: 1/16"- .0313" 1/4"- .25"
Stepover: 40%
Material: 1/8" and 1/4" acrylic


Tools used:

Axiom AR8 2'x4' CNC -
toolstoday.com/v-14604-axiom-prov5-series.html
- - - - - - -
Design Software - Vectric V-Carve Pro -
toolstoday.com/cnc-machines-accessories/cnc-software.html
- - - - - - -
Amana Tool 51404-K Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/4 D x 3/4 CH x 1/4 SHK x 2 Inch Long Up-Cut CNC Router Bit with Mirror Finish
toolstoday.com/v-13351-51404-k.html
- - - - - - -
Amana Tool 51441-K Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/16 D x 1/4 CH x 1/4 SHK x 2 Inch Long Up-Cut CNC Router Bit with Mirror Finish
toolstoday.com/v-13374-51441-k.html
- - - - - - -
Starbond Multi-Purpose Medium CA Glue
toolstoday.com/v-15019-1502.html
- - - - - - -
#short #shorts
** Subscribe - youtube.com/user/toolstoday

** Shop the website - toolstoday.com

** Like at Facebook - tinyurl.com/toolstoday-facebook

** Follow on Instagram - instagram.com/toolstoday