Making a metal melting furnace from DIY oil burner @glumpy10
Making a metal melting furnace from DIY oil burner  @glumpy10
Uploaded October 2015 | Updated September 2026, 6 days ago
Here I use a Waste oil burner as a small aluminum furnace with crucible and directly melting in the burner itself. This setup would be ideal for DIY'ers who have occasional need to melt small amounts of Aluminum ( up to 10 lbs) but do not want to go to the expense of a refractory furnace or have the space for one.

Using any form of waste oil WVO, WMO, ATF etc, aluminum can be melted in the burner either directly or in a crucible.
The burner is made from an old 9 Kg gas bottle and is featured in my other vids. The Crucible is simply some thick wall 4" pipe with a piece of 1/4" plate welded on the bottom.

The waste oil burner is running on used cooking oil but can run any other combustible liquid. The fuel is blown in by the air stream from the blower and is directed in a swirling motion around the edge of the burner. The crucible heat up quickly and the aluminum is rapidly reduced to a pourable or castable liquid.

Please don't forget to click on my channel name to see a list of all my other burners and experiments.
Making a metal melting furnace from DIY oil burnerEASY build water heater for emergency or survival use on waste oilPouring Molten Aluminium on my Balls!Waste oil burner Downwards firing for scrappingInduction motor setup as a GeneratorOil burner setup for 600Kw Free heat output.Waste oil Burner free heatiPhone burn and melt test in furnaceNon Babbington Spray waste oil BurnerAluminium car parts melt with oil Burner simple furnaceAluminium melting with simple wood fired furnace with Extra safety tips!
Oil Burner |

Making a metal melting furnace from DIY oil burner

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER