Uploaded October 2023 | Updated September 2026, 1 week ago
G'day everyone,
In this video I will be moving along with the build of my mini workshop fly press. In the previous video (youtu.be/I2OPgacXKtk) I managed to machine the base. All 25kg of it on my relatively small milling machine. If you haven't watched it, I suggest that you do to familiarize yourself with the scope of this project.
In this video I will finish off the frame, which will be made from welded pieces of 75mm solid square bar, roughly 3 inches. This is solid enough for this project. Before it can be welded it will need to be tapped using by massive 40mm square thread tap set, which I made a few months ago. The square thread is better suited as a power transfer screw than a normal 60 degree V thread.
However tapping with such a large tap set is going to be a very difficult and drawn out process.
#machining #diy #flypress
Fly Press
Fly Press Build
Timestamps
0:00 - T - Nuts & Intro
1:52 - Tapping For The Guide Blocks
3:07 - 40mm Sqaure Tap Set
8:40 - Tap Grinding and Take 2
13:14 - Grinding and Welding The Frame
17:18 - Welding The Frame To The Base
G'day everyone,
In this video I will be moving along with the build of my mini workshop fly press. In the previous video (youtu.be/I2OPgacXKtk) I managed to machine the base. All 25kg of it on my relatively small milling machine. If you haven't watched it, I suggest that you do to familiarize yourself with the scope of this project.
In this video I will finish off the frame, which will be made from welded pieces of 75mm solid square bar, roughly 3 inches. This is solid enough for this project. Before it can be welded it will need to be tapped using by massive 40mm square thread tap set, which I made a few months ago. The square thread is better suited as a power transfer screw than a normal 60 degree V thread.
However tapping with such a large tap set is going to be a very difficult and drawn out process.
#machining #diy #flypress
Fly Press
Fly Press Build
Timestamps
0:00 - T - Nuts & Intro
1:52 - Tapping For The Guide Blocks
3:07 - 40mm Sqaure Tap Set
8:40 - Tap Grinding and Take 2
13:14 - Grinding and Welding The Frame
17:18 - Welding The Frame To The Base
