Vez3D | LSD HotEnd - The retraction part#4 @Vez3D | Uploaded April 2022 | Updated October 2024, 19 hours ago.
Testing retraction on this one. Impressive so far.
-0.5mm TC nozzle
-0.5 layer width
-0.2 layer height
-210C with PLA
-30mms printing 200mms travel
-0 pressure advance
Link to Firmware retraction from teach tech: youtu.be/T4N59u4wm-Y
-klipper3d.org/Config_Reference.html#firmware_retraction
Making of: youtu.be/GTeez9qmoKo
PART#1: youtu.be/na_T0LT-jvI
PART#2: youtu.be/VTEAVoGn4fo
PART#3: youtu.be/1Zp8zzoMnJk
If you wish to support: ko-fi.com/vez3d
Full VzBoT Printer project: (BOM, cad, stl): github.com/VzBot3D
Please join us on FB: https://www.facebook.com/groups/40988...
Disord: discord.com/invite/KzgvHXsH5m
Testing retraction on this one. Impressive so far.
-0.5mm TC nozzle
-0.5 layer width
-0.2 layer height
-210C with PLA
-30mms printing 200mms travel
-0 pressure advance
Link to Firmware retraction from teach tech: youtu.be/T4N59u4wm-Y
-klipper3d.org/Config_Reference.html#firmware_retraction
Making of: youtu.be/GTeez9qmoKo
PART#1: youtu.be/na_T0LT-jvI
PART#2: youtu.be/VTEAVoGn4fo
PART#3: youtu.be/1Zp8zzoMnJk
If you wish to support: ko-fi.com/vez3d
Full VzBoT Printer project: (BOM, cad, stl): github.com/VzBot3D
Please join us on FB: https://www.facebook.com/groups/40988...
Disord: discord.com/invite/KzgvHXsH5m