Mark Lindsay CNC | Live Q&A #126 – MORE Epic Epoxy Inlays with Shane Peters and Rob Sandstrom @MarkLindsayCNC | Uploaded 2 years ago | Updated 2 hours ago
Live Q&A #126 – MORE Epic Epoxy Inlays with Shane Peters and Rob Sandstrom
LOTS more down here ↓↓↓ Click SHOW MORE!
This week, my guests Shane Peters of Shane’s Hardwoods and Rob Sandstrom of Generations Custom Creations will answer YOUR questions about their glorious epoxy inlay work.
Shane and Rob were my guests for Live Q&A # 122 in January of 2022, and gave us an introduction to their EPIC Epoxy Inlay work. There were so many questions during that Live Q&A, there was no way we’d get to all of them. So, they’ve both agreed to come back for a Live Q&A that’s 100% dedicated to YOUR questions.
So, get your epoxy inlay questions together and join us at 1 pm Pacific Time, 4 pm Eastern Time for this Special Live Q&A!
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
Link to Live Q&A #122: youtu.be/KgH8IGj5llM
If you missed Shane’s presentation at the Vectric’s 2021 Worldwide Users Group Meeting here’s a link to the video, courtesy of Vectric LTD’s YouTube channel: youtube.com/watch?v=DgMkZFFYyjU
Links to Shane, Rob, and Tim’s YouTube channels and other social media pages as discussed in this video:
Shane Peters
YouTube Channel: youtube.com/channel/UCHyKhYTCSjdhGIW-gZdVARA
Instagram: instagram.com/shaneshardwoodllc
Facebook: facebook.com/shaneshardwoodstore
Website: shaneshardwood.com
Rob Sandstrom
YouTube Channel: youtube.com/channel/UCbd4lM-oQYhB8BTpSWqnfdg
Instagram: instagram.com/generationscustomcreations
Facebook: facebook.com/rob.sandstrom.9
Tim Salesses
Facebook: facebook.com/the.cusstims
Instagram: instagram.com/cusstims
Links to videos, products, supplies, and websites discussed in this video:
Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing.
______________________________________________________________________________
If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the following link:
PayPal: paypal.me/MarkLindsayCNC
______________________________________________________________________________
Link to The Trampled Underfoot Podcast. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..."
YouTube: youtube.com/channel/UCPYOVYk9g-o0tliUqO18gnQ
Facebook Page: facebook.com/pg/TrampledUnderfootPodcast
Past Episodes available at our website: trampledunderfootpodcast.com
_______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
___________________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products
___________________________________________________________________________________
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com
For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric
__________________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#EpoxyInlay #Epoxy #Tutorial #Beginner
Live Q&A #126 – MORE Epic Epoxy Inlays with Shane Peters and Rob Sandstrom
LOTS more down here ↓↓↓ Click SHOW MORE!
This week, my guests Shane Peters of Shane’s Hardwoods and Rob Sandstrom of Generations Custom Creations will answer YOUR questions about their glorious epoxy inlay work.
Shane and Rob were my guests for Live Q&A # 122 in January of 2022, and gave us an introduction to their EPIC Epoxy Inlay work. There were so many questions during that Live Q&A, there was no way we’d get to all of them. So, they’ve both agreed to come back for a Live Q&A that’s 100% dedicated to YOUR questions.
So, get your epoxy inlay questions together and join us at 1 pm Pacific Time, 4 pm Eastern Time for this Special Live Q&A!
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
Link to Live Q&A #122: youtu.be/KgH8IGj5llM
If you missed Shane’s presentation at the Vectric’s 2021 Worldwide Users Group Meeting here’s a link to the video, courtesy of Vectric LTD’s YouTube channel: youtube.com/watch?v=DgMkZFFYyjU
Links to Shane, Rob, and Tim’s YouTube channels and other social media pages as discussed in this video:
Shane Peters
YouTube Channel: youtube.com/channel/UCHyKhYTCSjdhGIW-gZdVARA
Instagram: instagram.com/shaneshardwoodllc
Facebook: facebook.com/shaneshardwoodstore
Website: shaneshardwood.com
Rob Sandstrom
YouTube Channel: youtube.com/channel/UCbd4lM-oQYhB8BTpSWqnfdg
Instagram: instagram.com/generationscustomcreations
Facebook: facebook.com/rob.sandstrom.9
Tim Salesses
Facebook: facebook.com/the.cusstims
Instagram: instagram.com/cusstims
Links to videos, products, supplies, and websites discussed in this video:
Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing.
______________________________________________________________________________
If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the following link:
PayPal: paypal.me/MarkLindsayCNC
______________________________________________________________________________
Link to The Trampled Underfoot Podcast. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..."
YouTube: youtube.com/channel/UCPYOVYk9g-o0tliUqO18gnQ
Facebook Page: facebook.com/pg/TrampledUnderfootPodcast
Past Episodes available at our website: trampledunderfootpodcast.com
_______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
___________________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products
___________________________________________________________________________________
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com
For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric
__________________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#EpoxyInlay #Epoxy #Tutorial #Beginner