Tiling Toolpaths Part 2 – Mounting and Cutting the Project @MarkLindsayCNC
Tiling Toolpaths Part 2 – Mounting and Cutting the Project  @MarkLindsayCNC
Uploaded April 2024 | Updated November 2026, 7 hours ago
Tiling Toolpaths Part 2 – Mounting and Cutting the Project
More down here ↓↓↓ Click MORE!

In this video, I’ll finish the Tiling Toolpaths project we designed using Vectric Aspire Version 11.5. I’ll first show you the project materials, and describe the finish I’ve applied off-camera. Then I’ll show you how I’m mounting the material to my spoilboard, then walk you through my process for carving the project step by step.

I’ll then wrap things up by showing you the finished project, and discuss what I’ve learned along the way.

As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below.

On Sunday, April 28th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!

Here’s a link to the Live Q&A: youtube.com/live/2EOhvB6nLt8

Link to Part 1 of this series, Tiling Toolpaths Part 1 – Design, Toolpath, and Save G-Code: youtube.com/watch?v=UDr2-ADDThs

Mark's custom T-shirt by Innovative Icons: facebook.com/innovativeiconscraftsembroidery

Link to Cabot Exterior Stain: tinyurl.com/yrmt6sjz
Link to R.I.P Precision Tools VBC-30250F3 30 degree v-bit: tinyurl.com/5n8s4ku7
Link to SpeTool .125 inch End Mill (5 Pack): amzn.to/3fuVzOu
Link to Bosch .25 inch Upcut End Mill: amzn.to/2QWqeDX
Link to Omer Composite Nail Gun: tinyurl.com/ysuxhp3c
Link to 1 inch Raptor Composite Nails: tinyurl.com/bnsye2fm

______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
PayPal: paypal.me/MarkLindsayCNC

Direct link to more information on becoming a Channel Member: youtube.com/channel/UCMrMqMabXS5_cFcq5K9Ob-w/join
Thank you very much!
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
marklindsaycnc.com/index.php/product-category/logo-products

marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
vectric.com
For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#avidcnc #4848Pro #cncrouter

Click the JOIN button to get access to perks:
youtube.com/marklindsaycnc/join
Tiling Toolpaths Part 2 – Mounting and Cutting the ProjectLive Q&A #297 – Special Guest – Liberty from IDC WoodcraftLive Q&A #241 – Vectric V12 Toolpath Tips – Open Q&ALive Q&A #264 – Vectric V12+ for the Absolute Beginner – Part 9Live Q&A #288 – Open Q&ALive Q&A #198 – Open Q&ALive Q&A #296 – Open Q&ALive Q&A #331 - Open Q&ALive Q&A #274 – Open Q&ALive Q&A #204 – Open Q&AZ Zero Position - Machine Bed AND Material SurfaceLive Q&A #207 – Open Q&A
Mark Lindsay CNC |

Tiling Toolpaths Part 2 – Mounting and Cutting the Project

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER