Mark Lindsay CNC | Introduction to Work Offsets and Fixture Offsets @MarkLindsayCNC | Uploaded 1 year ago | Updated 2 hours ago
Introduction to Work Offsets and Fixture Offsets
More down here ↓↓↓ Click MORE!
In this video, I’ll show you how I created a simple fixture on the spoilboard of my @Avid CNC 4848 Pro CNC Router! First I’ll introduce the concept of Work Offsets. I’ll then show you how I created a file in @Vectric Aspire to drill a series of holes in my spoilboard to use as a fixture. Then I’ll show you how I used precision ground dowels in those holes to accurately mount a piece of material. And then I’ll show you how I created a G59 Fixture Offset in Mach4 to be able to repeatably use that simple fixture.
Finally, I’ll summarize the entire process step by step.
As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below.
On Sunday, September 4th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: youtu.be/o_ASK3gqytU
Link to Precision Ground 1/4 inch Steel Dowels I used in this video: amzn.to/3CULZwd
Link to the Amana RC-2255 2.5 inch diameter Surfacing Bit: amzn.to/3TAxyEK
Link to One Guy in a Shop Etsy Store for info on the dust shoe I use: etsy.com/shop/OneGuyInAShop
Link to Blue Line Wood Flags YouTube video that describes the dust hose bracket, including info on how you can download the STL files to print your own: youtube.com/watch?v=s2zWUY5ibK0
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
PayPal: paypal.me/MarkLindsayCNC
Direct link to more information on becoming a Channel Member: youtube.com/channel/UCMrMqMabXS5_cFcq5K9Ob-w/join
Thank you very much!
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
______________________________________________________________________________
Link to The Trampled Underfoot Podcast, hosted by my friend Eloy Escagedo and I. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..."
YouTube: youtube.com/channel/UCPYOVYk9g-o0tliUqO18gnQ
Facebook Page: facebook.com/pg/TrampledUnderfootPodcast
Past Episodes available at our website: trampledunderfootpodcast.com
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com
For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#avidcnc #4848Pro #cncrouter
Introduction to Work Offsets and Fixture Offsets
More down here ↓↓↓ Click MORE!
In this video, I’ll show you how I created a simple fixture on the spoilboard of my @Avid CNC 4848 Pro CNC Router! First I’ll introduce the concept of Work Offsets. I’ll then show you how I created a file in @Vectric Aspire to drill a series of holes in my spoilboard to use as a fixture. Then I’ll show you how I used precision ground dowels in those holes to accurately mount a piece of material. And then I’ll show you how I created a G59 Fixture Offset in Mach4 to be able to repeatably use that simple fixture.
Finally, I’ll summarize the entire process step by step.
As usual, if you have any comments or questions about anything I covered in this video, please join me for the Live Q&A, or put ‘em in the comment section below.
On Sunday, September 4th, I’ll be hosting a LIVE Q&A session, where you can ask your questions pertaining to anything I’ve covered in this video. That Q&A starts at 3 pm Eastern time, Noon Pacific time. Hope to see you there!
Here’s a link to the Live Q&A: youtu.be/o_ASK3gqytU
Link to Precision Ground 1/4 inch Steel Dowels I used in this video: amzn.to/3CULZwd
Link to the Amana RC-2255 2.5 inch diameter Surfacing Bit: amzn.to/3TAxyEK
Link to One Guy in a Shop Etsy Store for info on the dust shoe I use: etsy.com/shop/OneGuyInAShop
Link to Blue Line Wood Flags YouTube video that describes the dust hose bracket, including info on how you can download the STL files to print your own: youtube.com/watch?v=s2zWUY5ibK0
______________________________________________________________________________
If you’d like to support my channel and help with the making of future videos, please consider becoming a channel member. If you’d rather make a one-time donation, you can do that by using the following link:
PayPal: paypal.me/MarkLindsayCNC
Direct link to more information on becoming a Channel Member: youtube.com/channel/UCMrMqMabXS5_cFcq5K9Ob-w/join
Thank you very much!
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
______________________________________________________________________________
Link to The Trampled Underfoot Podcast, hosted by my friend Eloy Escagedo and I. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..."
YouTube: youtube.com/channel/UCPYOVYk9g-o0tliUqO18gnQ
Facebook Page: facebook.com/pg/TrampledUnderfootPodcast
Past Episodes available at our website: trampledunderfootpodcast.com
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com
For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#avidcnc #4848Pro #cncrouter
