Uploaded September 2020 | Updated November 2026, 2 hours ago
The first activation is shown at 5:55
This is the Oxley Highway level crossing at Wauchope, New South Wales. It is located between Taree and Kempsey, on the ARTC North Coast Line which links Sydney and Brisbane.
These gated signals were installed on July 20, 2003 and replaced the original gate-less signals which dated back to August 13, 1975. Both gated signals have unmarked bases, Western Cullen Hayes gate mechanisms and Alstom LED lights. The eastern signal has a Western Cullen Hayes mechanical bell which replaced the original Westinghouse hybrid bell some time between 2010 and 2015. The western signal still has it's original Westinghouse hybrid bell although it has been dead since at least 2015.
The Western Cullen Hayes bell is programmed to ring from start up until the gates have lowered, and is also switched off at night between 10pm and 6am. The same applied for the hybrid bell. The gate-less signal on the western side of the crossing has a Western Cullen Hayes base and Alstom LED lights. All four pedestrian signals have Alstom LED don't walk lights and Klaxon alarms which sound until the gates rise.
Train information:
1st train: 4WB3 steel from Port Kembla to Brisbane, with locomotives NR67, LDP1 and TT108.
2nd train: 4621 cement and empty sugar hoppers from Newcastle (Morandoo) to Grafton, with locomotives 8250, 8257 and 48101.
Filmed on June 4, 2020.
The first activation is shown at 5:55
This is the Oxley Highway level crossing at Wauchope, New South Wales. It is located between Taree and Kempsey, on the ARTC North Coast Line which links Sydney and Brisbane.
These gated signals were installed on July 20, 2003 and replaced the original gate-less signals which dated back to August 13, 1975. Both gated signals have unmarked bases, Western Cullen Hayes gate mechanisms and Alstom LED lights. The eastern signal has a Western Cullen Hayes mechanical bell which replaced the original Westinghouse hybrid bell some time between 2010 and 2015. The western signal still has it's original Westinghouse hybrid bell although it has been dead since at least 2015.
The Western Cullen Hayes bell is programmed to ring from start up until the gates have lowered, and is also switched off at night between 10pm and 6am. The same applied for the hybrid bell. The gate-less signal on the western side of the crossing has a Western Cullen Hayes base and Alstom LED lights. All four pedestrian signals have Alstom LED don't walk lights and Klaxon alarms which sound until the gates rise.
Train information:
1st train: 4WB3 steel from Port Kembla to Brisbane, with locomotives NR67, LDP1 and TT108.
2nd train: 4621 cement and empty sugar hoppers from Newcastle (Morandoo) to Grafton, with locomotives 8250, 8257 and 48101.
Filmed on June 4, 2020.










