Uploaded May 2020 | Updated November 2026, 1 hour ago
The first activation is shown at 2:45
This is the Meatworks Private Road crossing at Riverstone, New South Wales. It is located in the western suburbs of Sydney and is situated about 500 metres north of Riverstone station, on the Richmond line.
The current signals were installed on June 15, 1991, replacing older warning signals which dated back to 1964 and consisted of single red lights and a bell. Riverstone Meatworks was closed in 1994 and the site is now used by various commercial enterprises, although the level crossing still retains it's Meatworks name.
All three signals originally had unmarked bases and Western Cullen Hayes incandescent lights mounted on Westinghouse crossarms. The lights have since been replaced by Alstom LED's although the Westinghouse crossarms were reused. The short signal on the eastern side of the crossing recently received a new United Group crossarm some time after November 2019. The original bell on the eastern side of the crossing was replaced by a new Western Cullen Hayes mechanical bell some time between 2014 and 2016.
Due to the risk of collisions, approaching trains are required to reduce their speed to 20km/h until reaching the crossing.
Filmed on May 29, 2020.
The first activation is shown at 2:45
This is the Meatworks Private Road crossing at Riverstone, New South Wales. It is located in the western suburbs of Sydney and is situated about 500 metres north of Riverstone station, on the Richmond line.
The current signals were installed on June 15, 1991, replacing older warning signals which dated back to 1964 and consisted of single red lights and a bell. Riverstone Meatworks was closed in 1994 and the site is now used by various commercial enterprises, although the level crossing still retains it's Meatworks name.
All three signals originally had unmarked bases and Western Cullen Hayes incandescent lights mounted on Westinghouse crossarms. The lights have since been replaced by Alstom LED's although the Westinghouse crossarms were reused. The short signal on the eastern side of the crossing recently received a new United Group crossarm some time after November 2019. The original bell on the eastern side of the crossing was replaced by a new Western Cullen Hayes mechanical bell some time between 2014 and 2016.
Due to the risk of collisions, approaching trains are required to reduce their speed to 20km/h until reaching the crossing.
Filmed on May 29, 2020.










