Uploaded May 2024 | Updated September 2026, 7 hours ago
Retep Reyem
|
[L193] Vachette Radial Picked
🔇 TAP TO UNMUTE
![[L193] Vachette Radial Picked](https://i.ytimg.com/vi/dLPWa6zMuCM/mqdefault.jpg "[L193] Vachette Radial Picked
[L193] Vachette Radial Picked")
![[L159] GEGE Mrt Pick and Gut](https://i.ytimg.com/vi/e-59_yXOXz8/mqdefault.jpg "[L159] GEGE Mrt Pick and Gut
GeGe Mrt is a magnetic safe deposit lock. It has 4 rotors that align to allow a plunder to drop. The plunder is spring loaded, the rotors like to move as you move other rotors. Tension is a tricky game with this lock.
00:00 Lock Operation
00:52 Picking Starts
05:30 Picked
06:46 Gutting Starts
11:48 Fully Gutted and lets look at elements
16:17 Close up Cheers and thanks
#lockpicking #locksport #lpu")
![[L100] Abloy Disclock Pick and gut. With Discombobulator](https://i.ytimg.com/vi/fM4Y7S8ugXQ/mqdefault.jpg "[L100] Abloy Disclock Pick and gut. With Discombobulator
Abloy disclock picked and gutted. My first open with this lock and tool. Lots of gate testing. As close to blind as I could. Thanks and cheers
00:00 Lock operation
00:32 Picking starts slowly lol
23:02 Picked
24:20 Gutting starts
28:21 Internals. Look at all the tumblers Loooooook :)
30:28 Close up Thanks and cheers
#lockpicking #locksport #lpu")
![[L196] Northern Telecom NE-22 Picked and Gutted](https://i.ytimg.com/vi/hOFxgqHJI_Q/mqdefault.jpg "[L196] Northern Telecom NE-22 Picked and Gutted
Today we have a Northern Telecom NE-22. This lock has 6 levers with false gates. It also has a divider in the middle of the lever pack. The plug is up against the lever pack under tension in neutral so tooling was a hurdle for a while. Also note the plug is separate from the cam for extra fun tensioning. Sorry for the curses it was the end of a long hungry day and a difficult task. (I am human not a machine see) lol 🤣☕ Cheers and thanks for stopping by☕
00:00 Lock Operation
00:22 Picking Starts
05:34 Curses at lever 1 Starts over.
08:17 Open
10:53 Gutting Starts
15:00 Gutted and tactics rambling
21:07 Tools used
23:22 Cheers and have a good day
#lockpicking #locksport #lpu")
![[L150] Kromer Protector 2030 (s484742) Picked and Gutted](https://i.ytimg.com/vi/hiU_hXIUjEU/mqdefault.jpg "[L150] Kromer Protector 2030 (s484742) Picked and Gutted
This example of Kromer Protector was made in mid 60s. Serial number 484742. Inside is 11 wafers. 10 sprung wafers and the 11th being a split wafer that is does not use a spring. All elements act the definition of Tapered. So much so that one of the best ways to fight it was compressing the wafer pack. This however muddied the feedback a lot.
This lock is rare, collectable, and hard to replace. So I didnt want to risk damaging anything. I have access to the same method as West Lockpicking and DoNotDuplicate. So in the spirit of locksport Im using as close to their method as possible. 2mm wire and basic tools. Im not risking epoxy ect on a loaned lock this exceptional.
This is the battle raw and learning on the fly. Thanks for watching.
WestLockPicking Pioneering tension method and pick
https://www.youtube.com/watch?v=MbdFG2zOdsA&t=481s
DoNotDuplicate showing more method and knowledge
https://www.youtube.com/watch?v=BWHGugQPBJM&t=868s
https://www.youtube.com/watch?v=wje4poUoZF0&t=3s
Big thanks to WestLockPicking for the opportunity for even thinking of sending this gem of a lock out, and all the rest. Cheers and thanks
00:00 Lock Operation
02:25 Picking starts
04:29 Downward tension added
38:06 Downward tension removed (oh Im still going)
43:43 Downward tension added (yeah again)
1:00:19 Picked! and picture time (volume check)
1:02:19 Gutting starts
1:05:52 Gutted and internals, rambling (that took a lot out of me)
1:08:48 Cheers and thanks
#lockpicking #locksport #lpu")
![[L180] Royal Guardian Picked and Gutted](https://i.ytimg.com/vi/hmBICb2KxD4/mqdefault.jpg "[L180] Royal Guardian Picked and Gutted
This example of Royal Guardian has 5 top stacks that are pin in pin. A little different than MTL for the pin in pin drivers. The side stacks are 4 trap pins that felt much harder to get right than the top stack. Thanks for watching and cheers
00:00 Lock operation
00:17 Picking Starts
04:12 Picked
05:15 Gutting Starts
10:45 Gutted and lets take a look
15:16 Tools Used
16:05 Close up Cheers and Thanks
#lockpicking #locksport #lpu")
![[L157] Ruko 600 barrels Picked and Gutted](https://i.ytimg.com/vi/hwxpbN3gc_A/mqdefault.jpg "[L157] Ruko 600 barrels Picked and Gutted
Ruko 600 with barrels and matching milling. Sorry for the archived video I had wanted to get another 600 because of how much autofocus issues I had in this video. But here we are send it. Not everything is perfect and thats ok. Thanks for watching and cheers
00:00 Lock Operation
00:24 Picking starts
14:29 Open
15:28 Gutting starts
18:28 Gutted and lets look at internals
20:10 close up thanks and cheers
#lockpicking #locksport #lpu")
![[L193] Vachette Radial Picked @RetepReyem](https://i.ytimg.com/vi/dLPWa6zMuCM/maxresdefault.jpg)
