Uploaded November 2022 | Updated September 2026, 11 hours ago
See full video ☕https://m.
youtube.com/watch?v=wZ7VWupvDPE
Retep Reyem
|
Finally Opening Opnus MMXII
🔇 TAP TO UNMUTE
![[L150] Kromer Protector 2030 (s484742) Picked and Gutted](https://i.ytimg.com/vi/hiU_hXIUjEU/mqdefault.jpg "[L150] Kromer Protector 2030 (s484742) Picked and Gutted
This example of Kromer Protector was made in mid 60s. Serial number 484742. Inside is 11 wafers. 10 sprung wafers and the 11th being a split wafer that is does not use a spring. All elements act the definition of Tapered. So much so that one of the best ways to fight it was compressing the wafer pack. This however muddied the feedback a lot.
This lock is rare, collectable, and hard to replace. So I didnt want to risk damaging anything. I have access to the same method as West Lockpicking and DoNotDuplicate. So in the spirit of locksport Im using as close to their method as possible. 2mm wire and basic tools. Im not risking epoxy ect on a loaned lock this exceptional.
This is the battle raw and learning on the fly. Thanks for watching.
WestLockPicking Pioneering tension method and pick
https://www.youtube.com/watch?v=MbdFG2zOdsA&t=481s
DoNotDuplicate showing more method and knowledge
https://www.youtube.com/watch?v=BWHGugQPBJM&t=868s
https://www.youtube.com/watch?v=wje4poUoZF0&t=3s
Big thanks to WestLockPicking for the opportunity for even thinking of sending this gem of a lock out, and all the rest. Cheers and thanks
00:00 Lock Operation
02:25 Picking starts
04:29 Downward tension added
38:06 Downward tension removed (oh Im still going)
43:43 Downward tension added (yeah again)
1:00:19 Picked! and picture time (volume check)
1:02:19 Gutting starts
1:05:52 Gutted and internals, rambling (that took a lot out of me)
1:08:48 Cheers and thanks
#lockpicking #locksport #lpu")
![[L180] Royal Guardian Picked and Gutted](https://i.ytimg.com/vi/hmBICb2KxD4/mqdefault.jpg "[L180] Royal Guardian Picked and Gutted
This example of Royal Guardian has 5 top stacks that are pin in pin. A little different than MTL for the pin in pin drivers. The side stacks are 4 trap pins that felt much harder to get right than the top stack. Thanks for watching and cheers
00:00 Lock operation
00:17 Picking Starts
04:12 Picked
05:15 Gutting Starts
10:45 Gutted and lets take a look
15:16 Tools Used
16:05 Close up Cheers and Thanks
#lockpicking #locksport #lpu")
![[L157] Ruko 600 barrels Picked and Gutted](https://i.ytimg.com/vi/hwxpbN3gc_A/mqdefault.jpg "[L157] Ruko 600 barrels Picked and Gutted
Ruko 600 with barrels and matching milling. Sorry for the archived video I had wanted to get another 600 because of how much autofocus issues I had in this video. But here we are send it. Not everything is perfect and thats ok. Thanks for watching and cheers
00:00 Lock Operation
00:24 Picking starts
14:29 Open
15:28 Gutting starts
18:28 Gutted and lets look at internals
20:10 close up thanks and cheers
#lockpicking #locksport #lpu")
![[L126] Fichet F3d Exterior Picked](https://i.ytimg.com/vi/j18VxF_AI5E/mqdefault.jpg "[L126] Fichet F3d Exterior Picked
Fichet F3D is a interesting mechanism. Consisting of 6 tumblers that interact with gears and two sidebars. Feedback on rotation was subtle, translation was not as bad in my experience. I admit this biting was not that aggressive. I will hopefully be getting another example to show something more akin to what I have seen on average. Thanks for watching. as always feel free to comment or question. Cheers
00:00 Lock Operation
00:41 Picking starts
03:35 Picked for the 2nd time
04:00 Locking back up and checking operation
4:30 Let the rambling begin lol Picking steps
07:15 Over view on this examples biting
07:54 Tool talk
08:26 Premature cheers and thanks. I still have to talk about exterior vs interior. lol
09:03 Cheers for real
#lockpicking #locksport #lpu")
![[L104] M&C Matrix SKG3 Picked and Gutted](https://i.ytimg.com/vi/j6Pxsj6NB78/mqdefault.jpg "[L104] M&C Matrix SKG3 Picked and Gutted
M&C matrix SKG3 has a top stack with 5 thin lipped spools and 5 springless sliders. Thanks for stopping by! Any questions feel free to ask. Cheers
00:00 Lock operation
00:21 Picking starts
00:53 Reset
01:08 Key use again
01:12 Picking starts again
04:29 Open
06:30 Gutting starts
10:06 Gutted and internals
13:03 Close up and some rambling.")
![[L106] Kaba Penta 15 pins pick and partial gut + dropping stuff on the floor.](https://i.ytimg.com/vi/jYzSlBtNWC0/mqdefault.jpg "[L106] Kaba Penta 15 pins pick and partial gut + dropping stuff on the floor.
My first open of Kaba Penta. 15 pins in 5 rows in this example . 4 left, 1 top left, 2 top, 3 top right, 5 right. I enjoyed picking this lock. As you will soon see. Not so much fun to gut lol.
00:00 Lock operation
00:38 Picking starts
06:17 Open
07:43 Gutting starts
14:25 key pins gutted
15:09 Here is where it starts going wrong lol
15:27 The searching starts
16:19 Calling it a partial gut now. lmao
18:21 Ok done searching for real. Lets show a different pin.
19:05 Why kaba can be so hard. I cant even hold a pin to show you. lol
19:44 Still cant hold one of these pins to show you lol
20:19 Finally behold the tapered joy that is KABA
21:10 Sorry about making a mess. Thanks for watching and cheers!
#lockpicking #locksport #lpu")
![[L153] Fontaine 7 Slider Pump Lock Picked 360](https://i.ytimg.com/vi/jp_YXHxPxO8/mqdefault.jpg "[L153] Fontaine 7 Slider Pump Lock Picked 360
This example of fontaine has 7 sliders and no false gates that I noticed. Picking was straight forward once I had a tensioner bent somewhat in shape. Thanks to @L0ckJocKey for letting me have a go at this was a lot of fun.
L0ckjocKeys video https://www.youtube.com/watch?v=tLFSUW2StZE
00:00 Lock Operation
00:40 Picking Starts
11:28 Full 360 done
11:34 Lock still works perfect
11:43 Tools and rambling
15:00 Close up cheers and thanks a bunch
#lockpicking #locksport #lpu")
![[L130] Chubb Definitive Standard Mortice](https://i.ytimg.com/vi/khfBuia-ysQ/mqdefault.jpg "[L130] Chubb Definitive Standard Mortice
This example of Chubb standard mortice has 5 levers with false gates and the detector lever. In picking it acted really tapered levers had to be hit many times to be properly set. Thanks for watching cheers
00:00 Lock Inspection Detector ready
01:09 Picking starts
09:43 Picked gasp
10:27 Gutting and talking starts
14:31 Detector lockout display
15:04 View and talk about internals
15:48 Tools used more rambling
17:20 Close up, Thanks for watching and cheers
#lockpicking #locksport #lpu")
![[L149] Walsall 2000 Picked](https://i.ytimg.com/vi/kq5ZPEKQ-L0/mqdefault.jpg "[L149] Walsall 2000 Picked
Walsall 2000 is a 5 lever lock with false gates. The false gates bite really hard so be careful to not fully drop into false set.
00:00 Lock Operation
00:47 Picking starts
13:51 Picked
15:08 Lock still works perfect
16:42 Tools used
17:30 Cheers and thanks
#lockpicking #locksport #lpu")
