KUKA iiQWorks: Configure Safety iiQKA.SafeOperation for iiQKA.OS2 in iiQWorks.Sim @KUKARobotGroup
KUKA iiQWorks: Configure Safety iiQKA.SafeOperation for iiQKA.OS2 in iiQWorks.Sim  @KUKARobotGroup
Uploaded June 2026 | Updated November 2026, 12 hours ago
In this introductory tutorial, you will receive a comprehensive overview of Argus Safety, the new modular safety system integrated into KUKA iiQKA.OS2. You will learn how safety concepts have evolved from iiQKA.SafeOperation to a flexible, point-based licensing model and how safety zones, rules, and tools can be graphically configured in iiQWorks.Sim.

The video also demonstrates how licensing, rule-based logic, and full robot arm monitoring work together to simplify commissioning. By the end of the tutorial, you will understand how to create and validate a safety configuration that can be used both in simulation and on a real robot controller.

The content of this video is intended solely as supplementary guidance. It does not replace formal training or certified instruction required for commissioning or operational procedures.

For official training and certification, participation in a KUKA College course is required. A link to the official KUKA College website can be found in the video description:

go.kuka.com/KUKAcollegeiIQKAOS2

What you will learn in this video:

00:00 Introduction – Overview of Argus Safety and iiQKA.OS2

01:25 From KSS SafeOperation to Argus Safety as a modular safety system

03:10 The point-based safety licensing model explained

05:17 Unified safety system for the entire robot portfolio

05:56 Controller firmware roadmap and future feature development

07:28 Safety configuration in the iiQKA.OS2 user interface

08:20 Graphical setup of safety zones in iiQWorks.Sim

10:02 Fundamentals of rule-based safety configuration

11:43 Project Analyzer and automatic license selection

12:20 Tool protection using sphere-based modeling

13:12 System limits and monitoring of the entire robot arm

14:42 Rule-specific stop behavior and axis-safe stops

15:44 Deployment stages and upcoming safety features

17:15 Live demo: Accessing the safety configuration

17:59 Creating and editing cell wall geometries

19:42 Visual validation of safety zones

21:18 Hardware interfaces and rule editor

22:57 Adding protected zones and triggering licensing

24:10 Point consumption and license overview

24:30 Conclusion – Summary and next steps

Useful links:

Download iiQWorks from the my.KUKA Marketplace:
go.kuka.com/myKUKAiiQWorks

Explore training and education offerings from KUKA College:
go.kuka.com/KUKAcollegeiIQKAOS2

Learn more about KUKA iiQWorks.Sim:
go.kuka.com/iiQWorksSim?utm_source=youtube&utm_medium=social&utm_campaign=KUKA_Rob_GLOBAL_YouTube

Discover more insights into the KUKA Digital Sphere:
go.kuka.com/DigitalSphere

Don't forget to like the video, subscribe to the channel, and activate the notification bell so you never miss tutorials and updates:
go.kuka.com/iiQWorksNews?utm_source=youtube&utm_medium=social&utm_campaign=KUKA_Rob_GLOBAL_YouTube
KUKA iiQWorks: Configure Safety iiQKA.SafeOperation for iiQKA.OS2 in iiQWorks.SimiiQKA.OS2: Streamlining Robot Setup with Virtual Control and Guided WorkflowsKUKA Training Cells: AI-enabled robotics for the skilled workers of tomorrowKUKA iiQWorks: Simulate robot IO mapping with Virtual Robot Controller (VRC)KUKA Mexico Celebrates 30 Years of InnovationOnline Medical Retailer Supports Rapid Growth with Mobile AutomationKUKA iiQWorks: Configure and program iiQKA.RobotSensorInterface (RSI)KUKA at PACK EXPO 2026: Next-Gen Robotics, AI-Driven Technologies, and Autonomous Mobile AutomationKUKA iiQWorks: Visualization and Render Modes in iiQWorks.SimAutonomous mobile robots in consumer goods packagingReal Industrial Robots. Real Learning.AMR Case Study in Intralogistics | TPV Displays Polska Automates Material Handling
KUKA Group |

KUKA iiQWorks: Configure Safety iiQKA.SafeOperation for iiQKA.OS2 in iiQWorks.Sim

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER