Uploaded May 2026 | Updated November 2026, 13 hours ago
In this beginner-friendly tutorial, you will learn how to install, configure, and use the iiQKA.RobotSensorInterface (RSI) in iiQKA.OS2 with iiQWorks.Cockpit and iiQWorks.Sim. You will see how RSI is installed via the Software Repository, how it is configured in iiQWorks.Sim, and how sensor-based robot motion can be validated using a Virtual Robot Controller (VRC) inside iiQWorks.Sim Advanced. The video walks you step by step through importing an example, running it in simulation, and monitoring the corrections live in the RSI Monitor inside iiQWorks.Cockpit. This workflow helps you safely verify sensor-guided robot behavior before deploying it to a real KUKA robot controller KRC5-2.
The content of this video is intended solely as a supplementary aid for mitigation purposes. It is not a substitute for formal training or certified instruction required for commissioning or operational procedures.
For official training and certification, participation in a KUKA College course is required. A link to the official KUKA College website is provided in the video description: go.kuka.com/KUKAcollegeiIQKAOS2
What you’ll learn:
00:00 Intro What the Robot Sensor Interface is and why it is used
00:20 Opening the Software Repository in iiQWorks.Cockpit
00:37 Installing the iiQKA.RobotSensorInterface package from iiQWorks.Cockpit
01:20 Restarting iiQWorks.Cockpit and opening the RSI Monitor
01:47 Preparing the robot model in iiQWorks.Sim
02:12 Adding a measuring tip to the robot flange
02:30 Adding the Robot Sensor Interface option to the robot
02:43 Configuring RSI option packages in Devices
03:00 Importing the Circle Correction context example
03:30 Importing the Circle Correction program
04:10 Adding a new Tool
04:40 Setting up the Virtual Robot Controller (VRC)
05:01 Deploying the Configuration to the VRC
05:30 Running the RSI program in simulation
05:50 Monitoring sensor-based corrections in the RSI Monitor in iiQWorks.Cockpit
06:30 Summary and result validation
06:45 Outro
Useful links:
Download iiQWorks on the my.KUKA marketplace: go.kuka.com/myKUKAiiQWorks
Check out the KUKA.College offerings and trainings: go.kuka.com/KUKAcollegeiIQKAOS2
Get more information on KUKA iiQWorks.Sim: go.kuka.com/iiQWorksSim?utm_source=youtube&utm_medium=social&utm_campaign=KUKA_Rob_GLOBAL_YouTube
Or for further insights in the KUKA Digital Sphere: go.kuka.com/DigitalSphere
Don’t forget to like, subscribe, and hit the bell icon for more tutorials and updates!
(go.kuka.com/iiQWorksNews?utm_source=youtube&utm_medium=social&utm_campaign=KUKA_Rob_GLOBAL_YouTube)
In this beginner-friendly tutorial, you will learn how to install, configure, and use the iiQKA.RobotSensorInterface (RSI) in iiQKA.OS2 with iiQWorks.Cockpit and iiQWorks.Sim. You will see how RSI is installed via the Software Repository, how it is configured in iiQWorks.Sim, and how sensor-based robot motion can be validated using a Virtual Robot Controller (VRC) inside iiQWorks.Sim Advanced. The video walks you step by step through importing an example, running it in simulation, and monitoring the corrections live in the RSI Monitor inside iiQWorks.Cockpit. This workflow helps you safely verify sensor-guided robot behavior before deploying it to a real KUKA robot controller KRC5-2.
The content of this video is intended solely as a supplementary aid for mitigation purposes. It is not a substitute for formal training or certified instruction required for commissioning or operational procedures.
For official training and certification, participation in a KUKA College course is required. A link to the official KUKA College website is provided in the video description: go.kuka.com/KUKAcollegeiIQKAOS2
What you’ll learn:
00:00 Intro What the Robot Sensor Interface is and why it is used
00:20 Opening the Software Repository in iiQWorks.Cockpit
00:37 Installing the iiQKA.RobotSensorInterface package from iiQWorks.Cockpit
01:20 Restarting iiQWorks.Cockpit and opening the RSI Monitor
01:47 Preparing the robot model in iiQWorks.Sim
02:12 Adding a measuring tip to the robot flange
02:30 Adding the Robot Sensor Interface option to the robot
02:43 Configuring RSI option packages in Devices
03:00 Importing the Circle Correction context example
03:30 Importing the Circle Correction program
04:10 Adding a new Tool
04:40 Setting up the Virtual Robot Controller (VRC)
05:01 Deploying the Configuration to the VRC
05:30 Running the RSI program in simulation
05:50 Monitoring sensor-based corrections in the RSI Monitor in iiQWorks.Cockpit
06:30 Summary and result validation
06:45 Outro
Useful links:
Download iiQWorks on the my.KUKA marketplace: go.kuka.com/myKUKAiiQWorks
Check out the KUKA.College offerings and trainings: go.kuka.com/KUKAcollegeiIQKAOS2
Get more information on KUKA iiQWorks.Sim: go.kuka.com/iiQWorksSim?utm_source=youtube&utm_medium=social&utm_campaign=KUKA_Rob_GLOBAL_YouTube
Or for further insights in the KUKA Digital Sphere: go.kuka.com/DigitalSphere
Don’t forget to like, subscribe, and hit the bell icon for more tutorials and updates!
(go.kuka.com/iiQWorksNews?utm_source=youtube&utm_medium=social&utm_campaign=KUKA_Rob_GLOBAL_YouTube)










