KUKA iiQWorks: Simulate robot IO mapping with Virtual Robot Controller (VRC) @KUKARobotGroup
KUKA iiQWorks: Simulate robot IO mapping with Virtual Robot Controller (VRC)  @KUKARobotGroup
Uploaded October 2025 | Updated November 2026, 12 hours ago
-In this tutorial, you'll learn how to simulate a KUKA robot project using the Virtual Robot Controller (VRC) in iiQWorks.Sim, connected to a Codesys project via OPC UA. We walk you through importing IO configurations, mapping digital inputs and outputs, and verifying signal behavior using the iiQKA.WebUI. You’ll also learn how to expand IO capacity using modules like the KUKA System Bus and EIOB, and explore alternative setups including Profinet. Everything demonstrated in the virtual environment works identically on a real robot running iiQKA.OS2.

The content of this video is intended solely as a supplementary aid for mitigation purposes. It is not a substitute for formal training or certified instruction required for commissioning or operational procedures.
For official training and certification, participation in a KUKA College course is required. A link to the official KUKA College website is provided in the video description: go.kuka.com/KUKAcollegeiIQKAOS2

*What you’ll learn:*
00:00 Intro
00:30 Setup
00:48 Switch-Case logic in robot program
01:17 Establish connection to Codesys
01:33 Importing IO configuration
02:12 Simulation with RCS
02:53 Switching to VRC
03:37 Signal troubleshooting
04:05 Adding IO modules
05:21 Mapping inputs for robot control
06:11 Verifying input connections
06:34 Mapping outputs
07:00 Testing signal behavior
08:18 Alternative IO setups
08:50 Exporting and importing configurations
09:21 Summary
09:45 Outro

Learn more about:

- iiQWorks – the digital engineering suite for digital manufacturing: kuka.com/iiqworks-engineering-suite
- iiQWorks.Sim – the robot simulation software for planning and Simulation: kuka.com/iiqworks-sim
- iiQWorks.Copilot – the AI-powered assistant for intelligent robot simulations: kuka.com/iiqworks-copilot
- Check out the KUKA.College offerings and trainings: go.kuka.com/KUKAcollegeiIQKAOS2


Don't forget to like, subscribe, and hit the bell icon for more tutorials and updates! (go.kuka.com/iiQWorksNews)

#KUKA #HomeofRobotik #KUKADigitalSphere #RobotInnovation #Automation #SmartTechnology #iiQWorks #iiQKAOS2 #FutureOfRobotics #TechTransformation #RoboticsRevolution #ConnectedSystems
KUKA iiQWorks: Simulate robot IO mapping with Virtual Robot Controller (VRC)KUKA Mexico Celebrates 30 Years of InnovationOnline Medical Retailer Supports Rapid Growth with Mobile AutomationKUKA iiQWorks: Configure and program iiQKA.RobotSensorInterface (RSI)KUKA at PACK EXPO 2026: Next-Gen Robotics, AI-Driven Technologies, and Autonomous Mobile AutomationKUKA iiQWorks: Visualization and Render Modes in iiQWorks.SimAutonomous mobile robots in consumer goods packagingReal Industrial Robots. Real Learning.AMR Case Study in Intralogistics | TPV Displays Polska Automates Material HandlingHow to Set Up and Commission KUKA.SeamTech with WorkVisual | Complete Step by StepAI-Ready Robotics Training in ActionThe all-in-one engineering suite for digital manufacturing | iiQWorks
KUKA Group |

KUKA iiQWorks: Simulate robot IO mapping with Virtual Robot Controller (VRC)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER