Table saw fence plans are up! Jer Schmidt 2015-10-09 | Buy the fence plans here: etsy.com/listing/250536010/table-saw-fence-with-incremental?ref=shop_home_active_1Watch the original build video: youtube.com/watch?v=4pudkvHFOfkWatch the box-joint-cutting video: youtube.com/watch?v=WJfU1UwY3V0Music:Macaroon 5 by Audionautix is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0)Artist: http://audionautix.comSupport me on Patreon: patreon.com/jeremyschmidt
Building a cyclone dust collector (part 3 of 3) Jer Schmidt 2022-10-08 | Thank you for watching! Part 1, Building the Cyclone:youtu.be/hn2lPDqwMKMPart 2, Building the Blower:youtu.be/obRBX0MBuSAWebsite article with CAD model:(Link coming soon. Or just email me for the CAD if you don't want to wait)Thanks to Bill Pentz. His website provides useful info about dust collection: http://billpentz.com/woodworking/cyclone/index.phpI was also inspired by Marius Hornberger to do this build. Here are Playlists to his fantastic dust collector builds:youtube.com/playlist?list=PLBfiYOoCeIJtmTF9VeCkfZAMJmmTyM9NPyoutube.com/playlist?list=PLBfiYOoCeIJv1FjCDit8dGyfAbpe_lRRG Patreon: patreon.com/jeremyschmidt
Building a Blower (DIY dust collector part 2) Jer Schmidt 2022-07-20 | Thank you for watching! Part 1, Building the Cyclone:youtu.be/hn2lPDqwMKMPart 3, Finishing the Dust Collector:youtu.be/7EzsHLm35joThanks to Bill Pentz. His website provides useful info about dust collection: http://billpentz.com/woodworking/cyclone/index.phpI was also inspired by Marius Hornberger to do this build. Here are Playlists to his fantastic dust collector builds:youtube.com/playlist?list=PLBfiYOoCeIJtmTF9VeCkfZAMJmmTyM9NPyoutube.com/playlist?list=PLBfiYOoCeIJv1FjCDit8dGyfAbpe_lRRGPatreon:patreon.com/jeremyschmidt
Building a Cyclone (DIY dust collector part 1) Jer Schmidt 2022-06-21 | Thank you for watching! Part 2, Building the Blower:youtu.be/obRBX0MBuSAPart 3, Finishing the Dust Collector:youtu.be/7EzsHLm35jo Thanks to Bill Pentz. His website provides useful info about dust collection: http://billpentz.com/woodworking/cyclone/index.phpI was also inspired by Marius Hornberger to do this build. Here are Playlists to his fantastic dust collector builds:youtube.com/playlist?list=PLBfiYOoCeIJtmTF9VeCkfZAMJmmTyM9NPyoutube.com/playlist?list=PLBfiYOoCeIJv1FjCDit8dGyfAbpe_lRRGPatreon:patreon.com/jeremyschmidt
Attachments for the Gen 2 belt grinder Jer Schmidt 2021-03-18 | Thank you for watching! Metric plans: etsy.com/listing/983255179Inch plans: etsy.com/listing/969292382(Plans for the adjustable table, contact wheel & small wheel attachments are bundled into one purchase)More info about the Contact Wheel Attachment:http://jerswoodshop.com/gen-2-contact-wheelMore info about the Small Wheel Attachment:http://jerswoodshop.com/gen-2-small-wheelMore info about the Adjustable Angle Table:http://jerswoodshop.com/gen-2-adjustable-tableMore info & plans for the Gen 2 Belt Grinder:http://jerswoodshop.com/gen-2-belt-grinderGen 2 Belt Grinder build video:youtu.be/2dxCAHU_xpYAdjustable Angle Table build video:youtu.be/OAoQLCXXbTkPatreon: patreon.com/jeremyschmidt
Gen 2 Belt Grinder (Metric plans!) Jer Schmidt 2021-03-18 | Thank you for watching! Metric plans: etsy.com/listing/969284638Inch plans: etsy.com/listing/969297008More info about the Gen 2 Belt Grinder:http://jerswoodshop.com/gen-2-belt-grinderContact Wheel & Small Wheel Attachment build video:youtu.be/G_oO9E4hIoIAdjustable Angle Table build video:youtu.be/OAoQLCXXbTk Patreon: patreon.com/jeremyschmidt
Pocket sheath for a precision rule Jer Schmidt 2019-05-10 | Thank you for watching! Patreon:patreon.com/jeremyschmidt
Building a table to hold my vise Jer Schmidt 2019-01-17 | Thank you for watching! The finished table is about 865lbs (390kg). With the vise it's about 1,025lb (465kg). The steel for the frame cost $235. The top was a scrap, cut from the center of a ring, and I don't remember the exact cost but I guess $400. The vise cost more than twice as much as the table, but both should last a few lifetimes.Support me on Patreon:patreon.com/jeremyschmidt
Adjustable belt grinder table Jer Schmidt 2018-12-13 | A new "Gen 2" version of my Tilting Belt Grinder design is now available. This table is compatible with both Gen 1 and Gen 2. More info about Gen 2:http://jerswoodshop.com/gen-2-belt-grinderMore info and plans for the adjustable table:http://jerswoodshop.com/gen-2-adjustable-tablePlaylist of belt grinder videos:youtube.com/playlist?list=PLUytjzdhelpbJQSFObRlAJKSoys_4zJxoSupport me on Patreon:patreon.com/jeremyschmidt
Arizona county cutting board (Made by hand) Jer Schmidt 2018-11-13 | Thank you for watching!Patreon:patreon.com/jeremyschmidt
Improved table holder for belt grinder Jer Schmidt 2018-09-02 | A new "Gen 2" version of my Tilting Belt Grinder design is now available. More info about Gen 2:http://jerswoodshop.com/gen-2-belt-grinderMore info and plans for this Gen 1 table holder:http://jerswoodshop.com/table-holderMore info about the Gen 1 belt grinder:http://jerswoodshop.com/2x72-tilting-belt-grinderPlaylist of all belt grinder related videos:youtube.com/playlist?list=PLUytjzdhelpbJQSFObRlAJKSoys_4zJxoPatreon:patreon.com/jeremyschmidt
Template following grinder for metal Jer Schmidt 2018-06-01 | Thank you for watching!More about my belt grinder:http://jerswoodshop.com/2x72-tilting-belt-grinderMore about the small wheel attachment:http://jerswoodshop.com/small-wheel-attachmentPlaylist of videos about the belt grinder:youtube.com/playlist?list=PLUytjzdhelpbJQSFObRlAJKSoys_4zJxoFollow me on Twitter: twitter.com/jerswoodshopSupport me on Patreon:patreon.com/jeremyschmidt
Belt grinder small wheel attachment Jer Schmidt 2018-04-19 | A new "Gen 2" version of my Tilting Belt Grinder design is now available, with a new, better Small Wheel Attachment to go with it. More info about Gen 2:http://jerswoodshop.com/gen-2-belt-grinderPlans and Sketchup models for this Gen 1 Small Wheel Attachment:http://jerswoodshop.com/small-wheel-attachmentPlaylist of videos about the belt grinder:youtube.com/playlist?list=PLUytjzdhelpbJQSFObRlAJKSoys_4zJxoFollow me on Twitter: twitter.com/jerswoodshopSupport me on Patreon:patreon.com/jeremyschmidt
Belt grinder contact wheel attachment Jer Schmidt 2018-01-28 | A new "Gen 2" version of my Tilting Belt Grinder design is now available, with a new, better version of this Contact Wheel Attachment to go with it. More info about Gen 2:http://jerswoodshop.com/gen-2-belt-grinderYou can get the plans and a Sketchup model for this Gen 1 Contact Wheel Attachment here: http://jerswoodshop.com/contact-wheel-attachmentWatch more videos about my belt grinder: youtube.com/playlist?list=PLUytjzdhelpbJQSFObRlAJKSoys_4zJxoSupport me on Patreon:patreon.com/jeremyschmidt
In depth - Custom tool stand Jer Schmidt 2017-12-10 | Thank you for watching!Watch the shorter version of this project:youtu.be/bMf4xorMWPkRead more and download a Sketchup model of the cabinet:http://jerswoodshop.com/custom-stand-for-my-belt-grinderSupport me on Patreon:patreon.com/jeremyschmidt
Custom tool stand for my belt grinder Jer Schmidt 2017-12-04 | Thank you for watching!Check out the "In Depth" build video here:youtu.be/NhfMIsqaUxcRead more and download the Sketchup model:http://jerswoodshop.com/custom-stand-for-my-belt-grinderSupport me on Patreon:patreon.com/jeremyschmidt
I turned my wood scraps into a bowl Jer Schmidt 2017-11-11 | Thank you for watching!My simplified wedgie sled:youtu.be/AdF7sKMKRR0Another interesting bowl I made:youtu.be/t8UMvzWm0KwSupport me on Patreon:patreon.com/jeremyschmidt
Belt grinder table holder (old design) Jer Schmidt 2017-09-06 | Notice: this table holder design has been superseded by one that is stronger and more versatile. Watch the video about the new one here: youtu.be/6lbUuRWsiFgYou can find more about the belt grinder and table holder here: http://jerswoodshop.com/2x72-tilting-belt-grinder Belt grinder build video: youtu.be/a_RlL1O-bK4Support me on Patreon:patreon.com/jeremyschmidt
How to make a torsion spring Jer Schmidt 2017-08-01 | More info & plans for the belt grinder: http://jerswoodshop.com/2x72-tilting-belt-grinderBelt grinder build video: youtu.be/a_RlL1O-bK4Support me on Patreon:patreon.com/jeremyschmidt
Super precise measurements with your phone! Jer Schmidt 2017-07-20 | Thank you for watching!The homemade pen video:youtu.be/18w-8JvSHI0Support me on Patreon:patreon.com/jeremyschmidt
Belt grinder radius jig Jer Schmidt 2017-04-26 | Thank you for watching!Watch the belt grinder build: youtu.be/a_RlL1O-bK4Get plans for the belt grinder: http://jerswoodshop.com/2x72-tilting-belt-grinderSupport me on Patreon:patreon.com/jeremyschmidt
Building the Gen 1 Belt Grinder Jer Schmidt 2017-04-12 | Plans are now available for an improved "Gen 2" version of this belt grinder. You can read about Gen 2 and buy the plans (in metric or inch) here: http://jerswoodshop.com/gen-2-belt-grinder And you can watch the build video for Gen 2 here: youtu.be/2dxCAHU_xpYSupport me on Patreon:patreon.com/jeremyschmidt
Making the Made in USA badge Jer Schmidt 2017-04-04 | Thank you for watching!Support me on Patreon:patreon.com/jeremyschmidt
Fixing a wobbly miter saw Jer Schmidt 2017-02-28 | Thank you for watching!Follow me on Instagram: instagram.com/jer_schmidtSupport me on Patreon:patreon.com/jeremyschmidt
Can you finger joint all sides of a box? Jer Schmidt 2017-01-05 | Yep, and it looks cool too, at least if you don't look too close.Patreon: patreon.com/jeremyschmidt
Basket weave bowl from plywood Jer Schmidt 2016-11-27 | Thank you for watching!This bowl consists of 96 baltic birch plywood segments, and 24 walnut segments (120 total). All rings are about 3/4" thick, so the total height is just under 4.5". Overall diameter is roughly 11.5".Patreon: patreon.com/jeremyschmidt
Simplified wedgie sled Jer Schmidt 2016-10-27 | Thank you for watching!You can get a Sketchup model of this sled, as well as an SVG drawing for the wedgies, from my website: http://jerswoodshop.com/simplified-wedgie-sledPatreon: patreon.com/jeremyschmidt
CNC dust collection hood Jer Schmidt 2016-10-10 | Thank you for watching!You can get a Sketchup model from this website article: http://jerswoodshop.com/cnc-router-dust-collectionPatreon: patreon.com/jeremyschmidt
All about my CNC machine Jer Schmidt 2016-10-03 | Ok, so it seems I led a lot of viewers to believe this is a good design. Seriously, you do not want to build a CNC using this design. It is a really terrible design actually. It is better than the other two I've used, but still not really "good enough". It has way too much flex in pretty much every direction. Sorry for misleading you.Patreon: patreon.com/jeremyschmidt
Rolling concrete camera rig Jer Schmidt 2016-09-25 | Thank you for watching!You can read more about this project and download a detailed Sketchup model from the website article here: http://jerswoodshop.com/making-a-dolly-for-my-camera-armPatreon: patreon.com/jeremyschmidt
Hardware boxes that wont shift in a drawer! Jer Schmidt 2016-09-12 | Thank you for watching!If you're interested in making this system yourself, you can download a free Sketchup model here: http://jerswoodshop.com/non-skid-hardware-boxesPatreon: patreon.com/jeremyschmidt
Jers DIY bolt action pen Jer Schmidt 2016-09-02 | Just a simple & minimalist but functional & practical EDC ink pen. That's it!If you would like to make a pen like mine, you can get a free Sketchup model here: http://jerswoodshop.com/my-homemade-bolt-action-penPatreon: patreon.com/jeremyschmidt
Making a Wall Mount for my Camera Jer Schmidt 2016-08-10 | Thank you for watching!You can get a sketchup model for this project here: http://jerswoodshop.com/wall-mounted-camera-armPatreon: patreon.com/jeremyschmidt
Tool Cabinet / Workbench BUILD Jer Schmidt 2016-07-21 | Thank you for watching!Workbench whys and wherefores video: youtube.com/watch?v=0HPNfQJNBYINo-jig-no-math dado-cutting method: youtube.com/watch?v=kQmm_B0rCOQThat other time I made drawers like this: youtube.com/watch?v=sSNLwEu1QCkWanna make one yourself? You can get the Sketchup model for free here: http://jerswoodshop.com/my-massive-concrete-workbenchPatreon: patreon.com/jeremyschmidt
Incredible Tool Cabinet / Workbench! Jer Schmidt 2016-07-19 | Thanks for watching!Build video: youtube.com/watch?v=wSJEy35J5vgScrap storage drawers: youtube.com/watch?v=sSNLwEu1QCkWanna make one yourself? You can get the Sketchup model here: http://jerswoodshop.com/my-massive-concrete-workbenchPatreon: patreon.com/jeremyschmidt
Perfect dados – NO JIGS & NO MATH! Jer Schmidt 2016-06-28 | Make exact width dados that perfectly fit the mating part every time! Thank you for watching!Patreon: patreon.com/jeremyschmidt
Worlds CLASSIEST Rolling Pin! Jer Schmidt 2016-06-10 | Thank you for watching!All music from www.bensound.comPatreon: patreon.com/jeremyschmidt
Jers Shop Stool Jer Schmidt 2016-05-19 | Making a simple stool for my shop. The legs are 1" square tube, 16 gauge wall. They are angled at 5°. The top is 12.5" square, 1.25" thick. If you want to try the texture on the top, you don't need a CNC machine, just use a router table with a 90° V-bit.Thank you for watching!Patreon: patreon.com/jeremyschmidt
Aluminum Cubic Trefoil Knot (Inspired by Pocket83) Jer Schmidt 2016-04-12 | Making a cubic trefoil knot from solid aluminum.Pocket83's cubic trefoil knot video: youtube.com/watch?v=Jw1Eyu54whIThank you for watching!Patreon: patreon.com/jeremyschmidt
Wooden mallet explosion! Jer Schmidt 2016-03-07 | This is a followup for my original homemade mallet video, which you can watch here: youtube.com/watch?v=sE6oabieqYIThank you for watching!Patreon: patreon.com/jeremyschmidt
Live Q&A recording Jer Schmidt 2016-03-01 | This is the recorded version of a live Q&A I did with Kriss and Marius. Links to their channels are below.Marius' channel: youtube.com/MariusHornbergerKriss' channel: http://youtube.com/FastEasySmartTOOLThanks for watching!
Live Q&A (With Kriss and Marius) Jer Schmidt 2016-02-26 | Q&A will be broadcast here ► youtu.be/vcgMpnAIuvcKriss’ Channel ► http://youtube.com/FastEasySmartTOOLMarius’ Channel ► youtube.com/MariusHornbergerVideos from Kriss ► youtube.com/watch?v=hBXn-0MjiQI&list=PL5b2pULC6udtlZF2RZk5H7ZGxpLTb4XQeVideos from Marius ►youtube.com/watch?v=tREMRr81olg&list=PLBfiYOoCeIJtmxpy5fOO4jNEI6-kQuH-k
Wooden tripod (part 2 of 2) Jer Schmidt 2016-01-26 | Making the extension arm and iPhone mount for my homemade tripod. Be sure to check out part 1 as well as the free Sketchup model below!Part 1: youtube.com/watch?v=1aBA_0Gge_ESketchup drawings: http://jerswoodshop.com/wooden-tripodPatreon: patreon.com/jeremyschmidt
Wooden tripod (part 1 of 2) Jer Schmidt 2016-01-20 | Making a new tripod to help me make better videos for you! Links to part 2 as well as the free Sketchup drawing are below.Part 2: youtube.com/watch?v=m7VuIlZXN7cSketchup model: http://jerswoodshop.com/wooden-tripodPatreon: patreon.com/jeremyschmidt
General purpose crosscut sled Jer Schmidt 2015-11-27 | Making a simple crosscut sled for my table saw. Free Sketchup drawing below!Sketchup drawing: http://jerswoodshop.com/general-purpose-crosscut-sledWhy am I changing my channel name?? (It has changed already, but here's why) In short, the “Woodshop” part of the name is limiting. In long, with "Jer’s Woodshop”, everyone expects me to post only woodworking videos. But I also like metalworking, and just making in general. I don’t intend to change the sort of videos I make, and I’ll definitely keep making stuff. There might be a bit more metalworking, and some projects that aren’t tools. Believe it or not these tools & jigs usually take a lot of time to design, so if I want to post videos more frequently, there will need to be some more basic projects. In the long run it is to the benefit of this channel. You don’t need to do anything, and you will stay subscribed. The name will change to Jeremy Schmidt on December 12, 2015. Thanks!Support me on Patreon: patreon.com/jeremyschmidt
Scrap storage drawers Jer Schmidt 2015-11-01 | Making some very simple drawers for storing my scrap wood. Patreon: patreon.com/jeremyschmidt
Viewing 3D models in Sketchup Jer Schmidt 2015-10-16 | In my last video I promised to make a video about viewing Sketchup drawings, so here it is. If you want the plans for the table saw fence, here's a video about that: youtube.com/watch?v=KAWA9_0F20MThanks for watching! More project videos coming soon!
Make a dead blow mallet on the X-Carve Jer Schmidt 2015-09-28 | Making a dead blow mallet, from plywood, using the X-carve. And my review of the X-carve.Steve Ramsey's mallet build: youtube.com/watch?v=JcaV5jWpR1kInventables project page, where you can get the SVG to make your own mallet: inventables.com/projects/make-a-dead-blow-malletInventables website: inventables.comThank you for your interest, good luck in building your own!Support me on Patreon: patreon.com/jeremyschmidt
Shop Update (August 2015) Jer Schmidt 2015-09-01 | Just letting you know whats going on with me and my shop! More projects coming soon!
