Uploaded January 2025 | Updated September 2026, 3 days ago
In this video we sew the jeans pattern included with this Vouge Pattern.
Notice! I would cut pattern piece #22 at least 2 inches longer than the pattern. I would also cut the waistband as 1 piece 4.25 inches wide. Then simply fold it over.
This became a much longer video than I anticipated! I decided to leave it because beginners seem to like all the details. If you are looking for a quick snappy video this one is NOT for you. I may do a quicker step series video at some point. It was created over a couple of weeks during the busy Holidays. Let me know if something isn't clear for you.
Here is a video showing the technique I used in sewing the front flat felled seam in this video: youtu.be/UQe5gTasl34?si=NU-6m_SiqLY4K19c
0:00 Pattern Modification I made
4:09 Extending Pattern Piece 22 , which is the right side of the waistband
7:12 Sewing the Pocket On to the Right side of the fabric
9:33 Top stitching the pocket with 2 rolls of stitches
11:36 Attaching the denim pocket piece to the pocket
21:12 Surging the pocket closed
22:53 Sewing the slight gap I left on the pocket back down to the side seam
24:16 Surging our Coin Pocket Edges
27:01 Showing the results of pressing the coin pocket side in 5/8th of an inch
27:53 Sewing the coin pocket and how we figure out to place it
40:27 Attaching the coin pocket to the pants edges
43:15 Preparing the Fly Shield
01:01:42 Sewing the Zipper on with the Fly
01:03:36 Top Stitching the Fly Front
01:05:06 Sewing the Zipper on
01:11:04 Top Stitching the 2 Rows along the Fly
01:25:00 Attaching the Fly Shield to the Zipper
01:29:00 Attaching the Front of the Pant together at the Fly
01:36:36 Preparing the Back Pocket
01:38:22 Top Stitching the Top of the Back Pockets
01:42:42 Attaching the Back Pockets
01:51:19 Sewing on the Back Yokes
02:02:06 Sewing the Back Crotch Flat Felled Seam
02:23:13 Sewing the Front Crotch using the School Gluing Method
02:32:10 Sewing the inner leg Flat Felled Seam
03:04:50 Sewing the outer leg seams
03:10:39 Sewing and Cutting the Belt Loops
03:13:45 Stay Stitching the Top of the pants before putting on the waistband
03:16:35 Sewing the ends of the waistband together
03:19:19 Prepping to sew on the waistband
03:20:05 Showing the Number of Belt Loops I will be installing and prepping them
03:32:57 Sewing on the Waistband
03:46:01 Pressing the Waistband
03:49:18 Sewing the ends of the Waistband
03:56:50 Top Stitching the Waistband and joining the top folded edges together.
04:21:36 Sewing on the belt loops (at least trying ;-))
04:30:30 Sewing the button hole on the waistband,
04:39:16 Marking & Installing the Button
04:44:30 Installing the Rivets using a hammer instead of my press. Demoing my trial and errors.
04:58:09 Hemming the pants
05:07:40 Ending Comments and we are done!
In this video we sew the jeans pattern included with this Vouge Pattern.
Notice! I would cut pattern piece #22 at least 2 inches longer than the pattern. I would also cut the waistband as 1 piece 4.25 inches wide. Then simply fold it over.
This became a much longer video than I anticipated! I decided to leave it because beginners seem to like all the details. If you are looking for a quick snappy video this one is NOT for you. I may do a quicker step series video at some point. It was created over a couple of weeks during the busy Holidays. Let me know if something isn't clear for you.
Here is a video showing the technique I used in sewing the front flat felled seam in this video: youtu.be/UQe5gTasl34?si=NU-6m_SiqLY4K19c
0:00 Pattern Modification I made
4:09 Extending Pattern Piece 22 , which is the right side of the waistband
7:12 Sewing the Pocket On to the Right side of the fabric
9:33 Top stitching the pocket with 2 rolls of stitches
11:36 Attaching the denim pocket piece to the pocket
21:12 Surging the pocket closed
22:53 Sewing the slight gap I left on the pocket back down to the side seam
24:16 Surging our Coin Pocket Edges
27:01 Showing the results of pressing the coin pocket side in 5/8th of an inch
27:53 Sewing the coin pocket and how we figure out to place it
40:27 Attaching the coin pocket to the pants edges
43:15 Preparing the Fly Shield
01:01:42 Sewing the Zipper on with the Fly
01:03:36 Top Stitching the Fly Front
01:05:06 Sewing the Zipper on
01:11:04 Top Stitching the 2 Rows along the Fly
01:25:00 Attaching the Fly Shield to the Zipper
01:29:00 Attaching the Front of the Pant together at the Fly
01:36:36 Preparing the Back Pocket
01:38:22 Top Stitching the Top of the Back Pockets
01:42:42 Attaching the Back Pockets
01:51:19 Sewing on the Back Yokes
02:02:06 Sewing the Back Crotch Flat Felled Seam
02:23:13 Sewing the Front Crotch using the School Gluing Method
02:32:10 Sewing the inner leg Flat Felled Seam
03:04:50 Sewing the outer leg seams
03:10:39 Sewing and Cutting the Belt Loops
03:13:45 Stay Stitching the Top of the pants before putting on the waistband
03:16:35 Sewing the ends of the waistband together
03:19:19 Prepping to sew on the waistband
03:20:05 Showing the Number of Belt Loops I will be installing and prepping them
03:32:57 Sewing on the Waistband
03:46:01 Pressing the Waistband
03:49:18 Sewing the ends of the Waistband
03:56:50 Top Stitching the Waistband and joining the top folded edges together.
04:21:36 Sewing on the belt loops (at least trying ;-))
04:30:30 Sewing the button hole on the waistband,
04:39:16 Marking & Installing the Button
04:44:30 Installing the Rivets using a hammer instead of my press. Demoing my trial and errors.
04:58:09 Hemming the pants
05:07:40 Ending Comments and we are done!
