Uploaded December 2025 | Updated November 2026, 47 minutes ago
Check out the @Fibreseek3D FibreSeeker 3D: fibreseeker-3.kckb.me/aad4a5d3 (affiliate link)
Thanks to FibreSeek for sponsoring this video!
------------------------------------------------------------------------------------------------------------
I finally got to test continuous carbon fiber 3D printing on the FibreSeeker 3. I printed a few real workshop projects, then pushed everything to the limit with a strength pull test using PLA, ABS, PPS-CF, PETG-CF, and continuous carbon fiber versions of the same part. This is not a lab-grade tensile test, but it does show how these materials behave under real load in a real shop. Some prints snapped instantly, some stretched, and the continuous carbon fiber version landed in a completely different category. I also share my honest experience using this beta machine, what went well, what needs improvement, and what the technology gets right.
------------------------------------------------------------------------------------------------------------
Mandic Labs 2.0 is supported by:
π₯ Prusa3D β prusa3d.com/#a_aid=MandicReally
π οΈ PCBWay β pcbway.com/g/k66yI7
Check out more MandicReally projects, merch, and ways to support the channel:
π mandicreally.com/links
π Special thanks to @multiboard_io for supporting the studio as well! : https://than.gs/u/234635?affiliateCode=mandicreally
------------------------------------------------------------------------------------------------------------
π Featured Products & Recommendations (Affiliate Links):
*** Fibre Seeker 3: fibreseeker-3.kckb.me/aad4a5d3
------------------------------------------------------------------------------------------------------------
π₯ My Filming Gear (Affiliate Links):
Main Camera β bhpho.to/3RStTnz
Main Lens β bhpho.to/4avDFmt
Video Recorder β bhpho.to/3Oa4qmZ
Action Cam β bhpho.to/45CS10Q
Wide Lens β bhpho.to/3RXQXBj
Motorized Slider β bhpho.to/48YMmnD
Studio Mic β bhpho.to/4216F1z
Voiceover Mic β bhpho.to/46uECsE
Monopod β bhpho.to/3PT2yir
Tripod β bhpho.to/3PSKXY4
Primary Lighting β bhpho.to/3RXSmb3
Accent Lighting β bhpho.to/3RXVfsf
RGB Lights β bhpho.to/3S77IbO
Drone β bhpho.to/423XrS6
------------------------------------------------------------------------------------------------------------
π§ͺ These are my real-world opinions based on hands-on use.
Some links are affiliate links, which means I may earn a small commissionβat no extra cost to you.
Not a paid endorsement unless explicitly stated in the video.
------------------------------------------------------------------------------------------------------------
β±οΈ TIMESTAMPS:
00:00 - Intro
00:41 - The FibreSeeker 3!
02:03 - Jack Stands
03:46 - Desinging for Carbon Fiber
04:20 - Jack Stand Hanging
05:26 - Let's Light This Sucker!
06:45 - Intelligent Slicer
07:15 - Printing Carbon Fiber
09:09 - Carbon Printing Results
09:28 - Light Mount Assembly
09:50 - Light Install
10:58 - Testing Carbon Fiber Printing!
12:00 - Testing Methodology
12:41 - TRUCK GO VROOM!
14:22 - What did we test?
14:51 - Truck Test Results
15:57 - Truck Test Number TWO!
17:03 - Beta Machine & Kickstarter
17:45 - Fibre Seek Cares
18:20 - Machine Updates & Issues
20:57 - It is a NORMAL 3D printer too!
21:26 - Who is the Fibre Seeker 3 for?
22:23 - Outro
#mandicreally #fibreseeker3 #3dprinting
Check out the @Fibreseek3D FibreSeeker 3D: fibreseeker-3.kckb.me/aad4a5d3 (affiliate link)
Thanks to FibreSeek for sponsoring this video!
------------------------------------------------------------------------------------------------------------
I finally got to test continuous carbon fiber 3D printing on the FibreSeeker 3. I printed a few real workshop projects, then pushed everything to the limit with a strength pull test using PLA, ABS, PPS-CF, PETG-CF, and continuous carbon fiber versions of the same part. This is not a lab-grade tensile test, but it does show how these materials behave under real load in a real shop. Some prints snapped instantly, some stretched, and the continuous carbon fiber version landed in a completely different category. I also share my honest experience using this beta machine, what went well, what needs improvement, and what the technology gets right.
------------------------------------------------------------------------------------------------------------
Mandic Labs 2.0 is supported by:
π₯ Prusa3D β prusa3d.com/#a_aid=MandicReally
π οΈ PCBWay β pcbway.com/g/k66yI7
Check out more MandicReally projects, merch, and ways to support the channel:
π mandicreally.com/links
π Special thanks to @multiboard_io for supporting the studio as well! : https://than.gs/u/234635?affiliateCode=mandicreally
------------------------------------------------------------------------------------------------------------
π Featured Products & Recommendations (Affiliate Links):
*** Fibre Seeker 3: fibreseeker-3.kckb.me/aad4a5d3
------------------------------------------------------------------------------------------------------------
π₯ My Filming Gear (Affiliate Links):
Main Camera β bhpho.to/3RStTnz
Main Lens β bhpho.to/4avDFmt
Video Recorder β bhpho.to/3Oa4qmZ
Action Cam β bhpho.to/45CS10Q
Wide Lens β bhpho.to/3RXQXBj
Motorized Slider β bhpho.to/48YMmnD
Studio Mic β bhpho.to/4216F1z
Voiceover Mic β bhpho.to/46uECsE
Monopod β bhpho.to/3PT2yir
Tripod β bhpho.to/3PSKXY4
Primary Lighting β bhpho.to/3RXSmb3
Accent Lighting β bhpho.to/3RXVfsf
RGB Lights β bhpho.to/3S77IbO
Drone β bhpho.to/423XrS6
------------------------------------------------------------------------------------------------------------
π§ͺ These are my real-world opinions based on hands-on use.
Some links are affiliate links, which means I may earn a small commissionβat no extra cost to you.
Not a paid endorsement unless explicitly stated in the video.
------------------------------------------------------------------------------------------------------------
β±οΈ TIMESTAMPS:
00:00 - Intro
00:41 - The FibreSeeker 3!
02:03 - Jack Stands
03:46 - Desinging for Carbon Fiber
04:20 - Jack Stand Hanging
05:26 - Let's Light This Sucker!
06:45 - Intelligent Slicer
07:15 - Printing Carbon Fiber
09:09 - Carbon Printing Results
09:28 - Light Mount Assembly
09:50 - Light Install
10:58 - Testing Carbon Fiber Printing!
12:00 - Testing Methodology
12:41 - TRUCK GO VROOM!
14:22 - What did we test?
14:51 - Truck Test Results
15:57 - Truck Test Number TWO!
17:03 - Beta Machine & Kickstarter
17:45 - Fibre Seek Cares
18:20 - Machine Updates & Issues
20:57 - It is a NORMAL 3D printer too!
21:26 - Who is the Fibre Seeker 3 for?
22:23 - Outro
#mandicreally #fibreseeker3 #3dprinting










