Uploaded October 2026 | Updated November 2026, 2 days ago
Mandic Labs 2.0 is supported by:
π₯ @Prusa3D β prusa3d.com/#a_aid=MandicReally
------------------------------------------------------------------------------------------------------------
Eight tools, eight spools, a heated filament chamber, and the whole thing rolls. My Prusa CORE One with INDX didn't fit in my print farm, so I built it a home.
Sponsored by Prusa Research. INBXX kit provided by @ldomotors, featuring the INDX toolchanger from @bondtechab.
Featured 3D Models:
*** INBXX: printables.com/model/1411246-inbxx-for-prusa-core-one-indx
*** Majora's Mask for INDX: printables.com/model/1777018-indx-8t-majoras-mask-multicolor
*** Squash Ball Riser: printables.com/model/1400757-squash-legs-with-expandable-steel-sheet-holder-for
*** Core One Vent Flaps: printables.com/model/1554243-core-one-vent-flaps
*** Core One HIVE Filter: printables.com/model/1560730-hive-core-one-internal-carbon-particulate-filter
*** Core One LED Lights: printables.com/model/1562241-magnetic-light-bar-prusa-core-one-added-leds-also
------------------------------------------------------------------------------------------------------------
Check out more MandicReally projects, merch, and ways to support the channel:
π mandicreally.com/links
π Special thanks to @multiboard_io for supporting the studio as well! : https://than.gs/u/234635?affiliateCode=mandicreally
------------------------------------------------------------------------------------------------------------
π Featured Products & Recommendations (Affiliate Links):
*** Core One w/ INDX: mrly.link/core-one-indx
*** LDO INBXX Kit: https://collabs.shop/komyvq
*** Butane Pen Torch: https://link.amazon/B0arb5jiT
*** Prusament Filament: mrly.link/prusament
*** SSR: https://collabs.shop/u45cel
*** Qidi Plus 4 Heater: https://collabs.shop/nejyqq
*** Meanwell UHP200 PSU: https://collabs.shop/inatc1
------------------------------------------------------------------------------------------------------------
π₯ My Filming Gear (Affiliate Links):
Main Camera β bhpho.to/3RStTnz
Main Lens β bhpho.to/4avDFmt
Video Recorder β bhpho.to/3Oa4qmZ
Action Cam β bhpho.to/45CS10Q
Wide Lens β bhpho.to/3RXQXBj
Motorized Slider β bhpho.to/48YMmnD
Studio Mic β bhpho.to/4216F1z
Voiceover Mic β bhpho.to/46uECsE
Monopod β bhpho.to/3PT2yir
Tripod β bhpho.to/3PSKXY4
Primary Lighting β bhpho.to/3RXSmb3
Accent Lighting β bhpho.to/3RXVfsf
RGB Lights β bhpho.to/3S77IbO
Drone β bhpho.to/423XrS6
------------------------------------------------------------------------------------------------------------
π§ͺ These are my real-world opinions based on hands-on use.
Some links are affiliate links, which means I may earn a small commissionβat no extra cost to you.
------------------------------------------------------------------------------------------------------------
β±οΈ TIMESTAMPS:
00:00 - Intro
00:17 - The Project
00:45 - Heat Inserts For Days
01:53 - INBXX Frame Assembly
02:44 - INBXX Printed Cladding
03:38 - Fixing Warped 3D Prints
04:21 - Filament Spool Holders
04:53 - Making My Life Harder, Custom Chamber Heating
06:42 - Lighting INBXX
07:00 - Casters
07:21 - Panels
07:44 - INDX Unboxing
08:16 - Modifying the Core One
09:00 - Vent Flaps
09:21 - Core One Teardown
09:58 - Lights, Camera, Action
10:30 - HIVE Core One Filter
11:25 - Relocated Filament Sensors
12:17 - INDX meets INBXX
12:38 - Power Wiring
12:56 - Reverse Bowden Tubes
13:12 - Loading Prusament
13:55 - 8 Color Benchy 3D Print
14:44 - 8 Color Majora's Mask 3D Print
15:55 - Mask Time & Purge Comparison
17:50 - Heat Insert Count
18:18 - The Lighting Difference
18:40 - INBXX Heater Performance & Control
20:13 - First Impressions
20:37 - Outro
#mandicreally #indx #coreoneindx
Mandic Labs 2.0 is supported by:
π₯ @Prusa3D β prusa3d.com/#a_aid=MandicReally
------------------------------------------------------------------------------------------------------------
Eight tools, eight spools, a heated filament chamber, and the whole thing rolls. My Prusa CORE One with INDX didn't fit in my print farm, so I built it a home.
Sponsored by Prusa Research. INBXX kit provided by @ldomotors, featuring the INDX toolchanger from @bondtechab.
Featured 3D Models:
*** INBXX: printables.com/model/1411246-inbxx-for-prusa-core-one-indx
*** Majora's Mask for INDX: printables.com/model/1777018-indx-8t-majoras-mask-multicolor
*** Squash Ball Riser: printables.com/model/1400757-squash-legs-with-expandable-steel-sheet-holder-for
*** Core One Vent Flaps: printables.com/model/1554243-core-one-vent-flaps
*** Core One HIVE Filter: printables.com/model/1560730-hive-core-one-internal-carbon-particulate-filter
*** Core One LED Lights: printables.com/model/1562241-magnetic-light-bar-prusa-core-one-added-leds-also
------------------------------------------------------------------------------------------------------------
Check out more MandicReally projects, merch, and ways to support the channel:
π mandicreally.com/links
π Special thanks to @multiboard_io for supporting the studio as well! : https://than.gs/u/234635?affiliateCode=mandicreally
------------------------------------------------------------------------------------------------------------
π Featured Products & Recommendations (Affiliate Links):
*** Core One w/ INDX: mrly.link/core-one-indx
*** LDO INBXX Kit: https://collabs.shop/komyvq
*** Butane Pen Torch: https://link.amazon/B0arb5jiT
*** Prusament Filament: mrly.link/prusament
*** SSR: https://collabs.shop/u45cel
*** Qidi Plus 4 Heater: https://collabs.shop/nejyqq
*** Meanwell UHP200 PSU: https://collabs.shop/inatc1
------------------------------------------------------------------------------------------------------------
π₯ My Filming Gear (Affiliate Links):
Main Camera β bhpho.to/3RStTnz
Main Lens β bhpho.to/4avDFmt
Video Recorder β bhpho.to/3Oa4qmZ
Action Cam β bhpho.to/45CS10Q
Wide Lens β bhpho.to/3RXQXBj
Motorized Slider β bhpho.to/48YMmnD
Studio Mic β bhpho.to/4216F1z
Voiceover Mic β bhpho.to/46uECsE
Monopod β bhpho.to/3PT2yir
Tripod β bhpho.to/3PSKXY4
Primary Lighting β bhpho.to/3RXSmb3
Accent Lighting β bhpho.to/3RXVfsf
RGB Lights β bhpho.to/3S77IbO
Drone β bhpho.to/423XrS6
------------------------------------------------------------------------------------------------------------
π§ͺ These are my real-world opinions based on hands-on use.
Some links are affiliate links, which means I may earn a small commissionβat no extra cost to you.
------------------------------------------------------------------------------------------------------------
β±οΈ TIMESTAMPS:
00:00 - Intro
00:17 - The Project
00:45 - Heat Inserts For Days
01:53 - INBXX Frame Assembly
02:44 - INBXX Printed Cladding
03:38 - Fixing Warped 3D Prints
04:21 - Filament Spool Holders
04:53 - Making My Life Harder, Custom Chamber Heating
06:42 - Lighting INBXX
07:00 - Casters
07:21 - Panels
07:44 - INDX Unboxing
08:16 - Modifying the Core One
09:00 - Vent Flaps
09:21 - Core One Teardown
09:58 - Lights, Camera, Action
10:30 - HIVE Core One Filter
11:25 - Relocated Filament Sensors
12:17 - INDX meets INBXX
12:38 - Power Wiring
12:56 - Reverse Bowden Tubes
13:12 - Loading Prusament
13:55 - 8 Color Benchy 3D Print
14:44 - 8 Color Majora's Mask 3D Print
15:55 - Mask Time & Purge Comparison
17:50 - Heat Insert Count
18:18 - The Lighting Difference
18:40 - INBXX Heater Performance & Control
20:13 - First Impressions
20:37 - Outro
#mandicreally #indx #coreoneindx










