MY BAMBU X-1 BROKE - Thermal Runaway?! Lets Fix it! @MandicReally
MY BAMBU X-1 BROKE - Thermal Runaway?! Lets Fix it!  @MandicReally
Uploaded January 2023 | Updated November 2026, 2 days ago
The Bambu Lab X-1 Carbon has taken the 3D Printing community by storm, and mine is BROKEN. My Bambu X-1 has an issue with the Toolhead PCB. The filament cutter was inaccurately claiming it was stuck. And worse yet, I had a Thermal Runaway issue on the Bambu Lab X-1 Carbon 3D printer. Let's replace my toolhead PCB in my Bambu X-1 and discuss this machine a bit more. Including some improvements in the ghosting / ringing issues I've had with the Bambu Lab X-1 Carbon.

Bambu Lab X-1: bambulab.com/en
Toolhead PCB Replacement Guide: wiki.bambulab.com/en/x1/maintenance/replace-the-th-board-assembly

-----------------------------------------------------------------------------------------------
Please consider supporting by checking out my various links:
mandicreally.com/links
-----------------------------------------------------------------------------------------------

Products Featured (Affiliate Links):

*** Bambu Lab X1 Carbon: tinyurl.com/BambuX1Carbon
*** Electric Screwdriver: amzn.to/3Pd6eLn
*** Polymaker Filament: tinyurl.com/Polymakerr

-----------------------------------------------------------------------------------------------
Filmed with (Affiliate Links):
*** Main Camera: bhpho.to/3RStTnz
*** Main Lens: bhpho.to/3FhSfjc
*** Video Recorder Monitor: bhpho.to/3RW0Yii
*** Action Camera: bhpho.to/45CS10Q
*** Wide Angle Lens: bhpho.to/3RXQXBj
*** Slider: bhpho.to/3ZRRIhi
*** Studio Microphone: bhpho.to/3PUL3yb
*** Voiceover Microphone: bhpho.to/46uECsE
*** Monopod: bhpho.to/3PT2yir
*** Tripod: bhpho.to/3PSKXY4
*** Primary Lighting: bhpho.to/3RXSmb3
*** Additional Lighting: bhpho.to/3RXVfsf
*** RGB Lights: bhpho.to/46S6VBn
*** Drone: bhpho.to/476GGr1
-----------------------------------------------------------------------------------------------

Timestamps:
0:00 - Intro
0:28 - Thermal Runaway?
2:30 - Toolhead PCB Replacement
4:30 - Laptop or 3D Printer? Rant
7:21 - Mainboard Fan
7:45 - Ringing / Ghosting
10:44 - Ringing Fix? Eh
11:30 - Quality Settings?
12:19 - Outro

The opinions expressed in this video are my own, from my personal experience. This is not a paid product advertisement. Please feel free to let me know what you think of this tool, or suggest alternatives I should check out. Disclaimer: This is not a paid advertisement. This video is solely my opinions from the use of these products and based on the specifications of them. Some of the links provided are AMAZON AFFILIATE LINKS or others. Affiliate links give the MandicReally a small advertising fee for every purchase made via those links. This does not cost you anything more than if you purchased them normally.
MY BAMBU X-1 BROKE - Thermal Runaway?! Lets Fix it!My 8-Color 3D Printer Needed A Home, So I Built It One!The 48-Hour 3D Print That FAILED Twice!Remix Contest Winner! - Random Chat Stream!Weird Controller for my DIY Steam Machine!?!FAIL FIX! #3dprinter #3dprintingBetter Studio Sound w/ a BIG DIY Sound Panel! - Revamp 04Studio Tour w/ 3D Printing Nerd! - YouTube Behind The ScenesFINALLY Building my Voron 2.4 - Live #13D Print Prototyping: Test Fitting #3dprinted Parts for Success!I tried the Reflex 2 and WOW! EASY Resin 3D Prints!FREE Software to Improve #3dprinting that you ALREADY HAVE!?! #3dprinter #3dprintingtips
MandicReally |

MY BAMBU X-1 BROKE - Thermal Runaway?! Let's Fix it!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER