Introducing OpenIPC VRX Ground Station, the cheapest digital long range FPV system in the world @mariofpv
Introducing OpenIPC VRX Ground Station, the cheapest digital long range FPV system in the world  @mariofpv
Uploaded September 2023 | Updated November 2026, 3 hours ago
Introducing the world’s cheapest NVR that has h265 decoding capabilities!
It costs only £14!

OpenIPC FPV is the cheapest digital FPV system in the world!

If you want please join my channel to get access to exclusive posts and updates:
youtube.com/channel/UCX2UiZjg485tDoq_Yl4Pysw/join

Read more here: openipc.org
You will find everything you need to start your own project!🎉

I used the new VENC/VDEC pipeline.
More information: github.com/OpenIPC/silicon_research/tree/master

You will need these commands during the installation process:

Command 1: setenv ipaddr 192.168.0.10; setenv serverip 192.168.0.40; mw.b 0x82000000 0xff 0x1000000; tftp 0x82000000 backup-hi3536dv100v3.bin

(Change the 192.168.0.10 to the NVR IP and the 192.168.0.40 to the TFTP IP)

Command 2: sf probe 0; sf lock 0; sf erase 0x0 0x1000000; sf write 0x82000000 0x0 0x1000000

The hardware (Air Unit + Ground Station) costs less than 50$ (all included) and can be found EVERYWHERE.
More supported cameras will be added with functions such as motorised optical zoom, IRCUT and latency as low as 30ms. It supports MAVLINK1 or MAVLINK2 bidirectional telemetry which makes it a complete solution for a quadcopter or fixed wing/VTOL. It also has WFB-ng link preinstalled and this means it has serious long range capabilities.

More information about the OpenIPC project will be in following videos so make sure you subscribe to not miss them!❤️

Join our new OpenIPC Discord Server: discord.gg/YAgNekXGXA

For more information about the WFB-ng system please join our fast growing community:
https://t.me/EZWBC

You can also join our facebook page:
https://m.facebook.com/groups/956912811789726

Link of the OpenIPC VRX that I used and recommend: https://a.aliexpress.com/_EIRd6zN

Link of the WiFi module I used: https://a.aliexpress.com/_EHjcP8x

The quadcopter is an XL8 iFlight regular 8” quadcopter. Full list of parts in previous videos.
I used INAV 6.1 and latest ExpressLRS.
Battery: 4S2P Li-Ion 10000mah
Introducing OpenIPC VRX Ground Station, the cheapest digital long range FPV system in the worldIntroducing OpenIPC IMX335 - World’s Lightest and Cheapest 1080p 120fps FPV CameraOpenIPC SSC338Q-IMX415, DVR in h265 with the World’s Cheapest 120fps Digital FPV SystemOpenIPC RunCam Wifilink 2 Dual cam thermal drone - Colour Palettes switch with Radiomaster TX16S MK3Introducing OpenIPC Mario AIOWorld’s Lightest 120fps OpenIPC FPV Camera Part 2Project Tutorial Part 1 WFB-ng on Raspberry Pi CM4 with Ochin carrier board!Get ready for the cheapest and lightest 1080p 120fps Open Source FPV Camera!🤯 #openipc #fpv #droneOpenIPC Digital FPV systemIntroducing OpenIPC Digital Image Stabilisation - Step by Step tutorialWFB-ng Thermal camera on Raspberry Pi with QOpenHD and ArdupilotHow to flash OpenIPC on CADDX Ascent Lite + VTX and then go back. Dual boot on the CADDX camera!
MarioFPV |

Introducing OpenIPC VRX Ground Station, the cheapest digital long range FPV system in the world

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER