Project Tutorial Part 1 WFB-ng on Raspberry Pi CM4 with Ochin carrier board! @mariofpv
Project Tutorial Part 1 WFB-ng on Raspberry Pi CM4 with Ochin carrier board!  @mariofpv
Uploaded October 2022 | Updated November 2026, 3 hours ago
This is the first part of the Project Tutorials.

Part 2: youtube.com/watch?v=CrK-_6z9XM4

This Air Unit can easily fit on a 5” quadcopter!

In this part we will assemble the Air Unit and go through the process of installing the image in the Compute Module 4.
Please watch the video until the end and then post in the comments section what you wish to see in the following parts.

The GitHub repo of the carrier board:
github.com/ochin-space/ochin-CM4

Join the community of WFB-ng:
https://t.me/EZWBC

Join the OpenHD Facebook community:
facebook.com/groups/956912811789726

Please subscribe! ❤️
Project Tutorial Part 1 WFB-ng on Raspberry Pi CM4 with Ochin carrier board!Get ready for the cheapest and lightest 1080p 120fps Open Source FPV Camera!🤯 #openipc #fpv #droneOpenIPC Digital FPV systemIntroducing OpenIPC Digital Image Stabilisation - Step by Step tutorialWFB-ng Thermal camera on Raspberry Pi with QOpenHD and ArdupilotHow to flash OpenIPC on CADDX Ascent Lite + VTX and then go back. Dual boot on the CADDX camera!OpenIPC updated JUMBO packets Step by Step TutorialOpenIPC High Bitrate tests Part 2EMAX Wyvern 200mW and Eachine Sphere Link IMX335 Penetration Tests with OpenIPC APFPV Greg10.2OpenIPC running on the Ascent Lite+ and on the Ascent VRX PRO - Latest statusOpenIPC London FlightOpenIPC DVR 3K FPV System.
MarioFPV |

Project Tutorial Part 1 WFB-ng on Raspberry Pi CM4 with Ochin carrier board!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER