WFB-ng Thermal camera on Raspberry Pi with QOpenHD and Ardupilot @mariofpv
WFB-ng Thermal camera on Raspberry Pi with QOpenHD and Ardupilot  @mariofpv
Uploaded November 2022 | Updated November 2026, 3 hours ago
In this video we are testing a high-end thermal camera with the new WFB-ng VTX system.
This video is the actual FPV video feed from the ground station.
We used two Raspberry Pi 4, one for the Air unit and one for the Ground station.
On the quadcopter we used Ardupilot latest stable firmware.
The flight happened at night when there was absolutely no light.
This camera is used by the military worldwide but we can also use it for night FPV.

I hope you enjoy the video and please don’t forget to like and subscribe!😊🍻

For more information join the communities:

Telegram: https://t.me/EZWBC
Facebook: facebook.com/groups/956912811789726/?ref=share
WFB-ng Thermal camera on Raspberry Pi with QOpenHD and ArdupilotHow to flash OpenIPC on CADDX Ascent Lite + VTX and then go back. Dual boot on the CADDX camera!OpenIPC updated JUMBO packets Step by Step TutorialOpenIPC High Bitrate tests Part 2EMAX Wyvern 200mW and Eachine Sphere Link IMX335 Penetration Tests with OpenIPC APFPV Greg10.2OpenIPC running on the Ascent Lite+ and on the Ascent VRX PRO - Latest statusOpenIPC London FlightOpenIPC DVR 3K FPV System.OpenIPC High Bitrate tests Part 1OpenIPC High Bitrate Mode TutorialIntroducing OpenIPC RunCam WifiLink 2Maiden Flight of OpenIPC running on ArtLynk hardware!
MarioFPV |

WFB-ng Thermal camera on Raspberry Pi with QOpenHD and Ardupilot

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER