Uploaded April 2021 | Updated November 2026, 4 days ago
I guess we will find out in 1 hour (4/19/2021, 3:30 am PDT) what @NASA / @NASAJPL #ingenuityhelicopter RTE camera first shot(s) will look like. Here is our first flight of #IngenuityinVR "FPV" mode just moments ago.
Yea, we are going to limit you to 46 deg. FOV in your #VR HMD as well.
#marshelicopter
I guess we will find out in 1 hour (4/19/2021, 3:30 am PDT) what @NASA / @NASAJPL #ingenuityhelicopter RTE camera first shot(s) will look like. Here is our first flight of #IngenuityinVR "FPV" mode just moments ago.
Yea, we are going to limit you to 46 deg. FOV in your #VR HMD as well.
#marshelicopter



![STUNNING results with NVIDIA DLSS 5 Neural Engine in Phantom Blade with hardware less than $1000.
As NVIDIA and modders continue to make great progress in optimizing the performance of the DLSS 5 Neural Engine for more and more platforms (see my other video applying it to the same game on a CachyOS/SteamOS 32GB Frameworks Strix Halo system) it is amazing what low end RTX 5050 (8GB) and AMD Ryzen 9500F with 32GB of DDR5-5600 memory and an off brand 5000 NVME on a low end $100 MSI mini TX board. Total price for the system a little more than a year ago was $700.
Since the was specifically built as a prototype of the Gaming Lens: SFFMU HARDCASE series it also contains a 10.5 IPS touch display in the lid at 1920x1280 (hence the odd aspect ratio seen in this video). And have been very please at the performance that I have been able to achieve in all the latest AAA games including the one above Phantom Blade, reaching 60-70 fps NLAA, high settings and Ray Tracing enabled. With that in mind I thought I would try one of the Optiscaler based DLSS 5 Neural Engine mods that you can apply to most recent AAA games, in several engines e.g. Unreal Engine, RE Engine, Zouna Engine (A Plague Tale: Resonance) and Valve Source 2. Including the UE based Phantom Blade with CAVEAT.
The problem with Phantom Blade is they dont use the standard UE game directory structure and Optiscaler default .dll locations for NVIDIA, AMD and Intel are not found, including DLSS 5 .dll. However, it is an easy fix and I have included a snippet below of the Optiscaler.ini that you need to edit. What you are doing is telling Optiscaler where to find the .dlls for NVIDIA GPUs so they can be used as the default Super Scaler and DLSS 5 specifically. Other games are straightforward installation of Optiscaler.
The most important change with NVIDIA DLSS 5 .dll is that it has been specifically modified for lower VRAM usage and optimized for better performance. Sadly, normally with any performance gains you may have to sacrifice quality, but 1920x1280 I did not see many and with a few other adjustments I was able to get consistent 60 fps with some latency. For me, I have never been a great gamer and at my current age of 67, my twitch skills have diminished. I find 60 fps more than adequate (especially since the touch screen max refresh rate is 60 Hz) and appreciate the subtle (I dont overdo the DLSS 5 settings) to improve the realism of the characters and environment breathing more life into an already to the exceptional beauty the artists and producers poured into this game.
If you are interested in getting DLSS 5 Neural Engine working with your SteamOS/CachyOS/Bazzite Linux build? Check out my upcoming test video and write-up for CachyOS based Frameworks Strix Halo, 32 GB DDR5LXP 8000Mhz miniI ITX board housed in the upcoming Gaming Lens: SFFMU Jewel Series enclosure/power/Oculink kit. Making it more compact than a Steam Machine in assortment of translucent jeweled color cases with custom RGBA lighting to for real SCIFI look as well as novel pull/push synchronized CFM triple fans system keeping your Strix Halo APU at a frosty 68 c at FULL THROTTLE for hours of intense compute or gaming.
Want to try it yourself? Here are few links and sample lines from my Optiscaler.ini to get you started.
https://github.com/Dagherbou/OptiScaler_DLSSNR/releases (the one used in this video) but due to its older Optiscaler build, it is very important to manually assign paths to your NVIDIA .dlls, especially in Phantom Blade.
https://github.com/Skynizz/optiscaler-dlss5/releases/tag/v1.3.0 (Currently testing and working in Phantom Blade, with over 60fps as well)
Optiscaler.ini (paths) (Note replace I:/SteamLibrary with your own path to your Steam library games.)
NOTE: I also use DLSS Update (https://github.com/Recol/DLSS-Updater), which works on Windows, Linux and MacOS and in my opinion superior to DLSS Swapper. Allowing for not only DLSS .dlls to be updated to the latest (including the DLSS 5 neural engine .dll), but AMD (FSR including the latest update to 4.1.2) and Intel (XESS). Make sure you run it before starting up Phantom Blade for the first time.
OPTISCALER.INI changes.
[Libraries]
;
; Main folder for OptiScaler to check dll files below
; Default is .OptiScaler
OptiDllPath=I:SteamLibrarysteamappscommonPBZProjectPBZBinariesWin64
; Options below for overriding path per dll
;
; nvngx.dll or _nvngx.dll
NvngxPath=I:SteamLibrarysteamappscommonPBZEnginePluginsRuntimeNvidiaDLSSBinariesThirdPartyWin64
; nvngx_dlss.dll
NvngxDlssPath=I:SteamLibrarysteamappscommonPBZEnginePluginsRuntimeNvidiaDLSSBinariesThirdPartyWin64
.
.
.
; This path will be added to paths of Nvngx during init
NvngxFeaturePath=auto STUNNING results with NVIDIA DLSS 5 Neural Engine in Phantom Blade with hardware less than $1000.](https://i.ytimg.com/vi/bUi0LrT6qR0/mqdefault.jpg)






