inertial propulsion with gyroscope part 14 @woopyjump
inertial propulsion with gyroscope part 14  @woopyjump
Uploaded March 2018 | Updated November 2026, 5 hours ago
I decided to rebuild the flat Fiala mono gyro device with a better motor and a regulator for fine tuning. And i also decided to keep this one as a reference for future design and measurement. So this one will not be dismantled for other experiment and will be my
SCALE.

To be sure, i redo the suspended wheel test. The wheel hang on a monotoron (unidirectional ) kevlar thread (see part 6 for explanation) so no torque from unwinding effect at all.

First i pushed slightly the wheel in a backwards rotation, to see if the device can brake the counter rotation ,then stop and then go forwards, and then accelerates.

And it does

Hope this helps

Laurent
inertial propulsion with gyroscope part 14freewheeling magnifier test 1.wmvonepulse shaking idea 1.wmvinertial propulsion with gyroscope extra 9.5 partPart 5  bACK emf versus flyback spike testinertial propulsion with gyroscope part 17 the pendulum test attemptinertial propulsion with gyroscope part 13ufo assymetric motor winding crude tuto 1freewheeling magnifier test 2 .wmvUfo assymetric motor part 1LENR pressurized reactor test 1 wmvelectrolysis spinning
woopyjump |

inertial propulsion with gyroscope part 14

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER