freewheeling magnifier test 2 .wmv @woopyjump
freewheeling magnifier test 2 .wmv  @woopyjump
Uploaded March 2011 | Updated November 2026, 3 days ago
Hi all

thanks for your comments on the previous video.

I made a mistake on the calculation.and this mistake pushed me to further thinking on the subject

And as Stephan (hartiberlin ) asked me i redo the test with the same cap value.

And what puzzled me, is that by a direct transfer of energy from one cap to the other, If i apply the energy formula ( 1/2 C*U ^2), i loose half the energy from the initial input. I mean there is no (or almost no) resistance in the circuit and the energy desapear ??? Where is this energy gone ?

Than i redo the experiment with the discharging of the main cap through the diode and inductor. An this time i have really a resistance due to the diode and the inductor (107 ohms). But at the end the voltage is about the same. I mean that if i add the remaining voltage in the main cap (about 1.9 volt) and in the filled cap (about 8.4 volts), which gives a created potential difference of 6.5 volts by the use of only 5 volts of initial potential difference.

All this let me think that in this kind of energy transfer. by using an inductor and a diode , we can increase the efficiency of the sayd transfer .

And the question is How and Why this is possible ?

good luck at all

Laurent

this subject is discussed at OU in the thread (electrical igniter)
freewheeling magnifier test 2 .wmvUfo assymetric motor part 1LENR pressurized reactor test 1 wmvelectrolysis spinningLENR outputvapor electrolysis versus plasma 1Ultralight in formation woopycoupe icare 2010 woopycharging by induction directly connecting to motorLENR pushing the bouchon one step further 1LENR in high voltage electrolysis perhaps 2inertial propulsion with gyroscope part special part 22 for Harvey FialaLenz delayed experiment 2.wmv
woopyjump |

freewheeling magnifier test 2 .wmv

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER