Uploaded July 2012 | Updated November 2026, 4 days ago
Hi all replicators
this is how i wound the Ufo assymetric 5 poles rotor
So you begin with uninsulating about 5 mm of your wire. ( i use a cigarette light than some sanding )
than you fix it to one of the collector hooking point and press it to definitiv fix it . ( for sake you can check with your meter if the collector plate is really connected to your wire )
than you point the axel right in your eyes and check on your copy of the Ufopolitics winding diagram.
And than you èlace the collector in the position as per the diagram.
Than you begin the winding exactly as per the diagram, and you wind 25 turns
At the end of this 25 turns , than you simply go on the winding , but this time , you cross the motor axel. so you make a V shape. and you go on the other 25 turns the same direction
and at the end you connect (of course you have uninsulated the last 5 mm of the wire ) to the oposit INLINE collector hooking point
of course a better tutorial will follow as we get further experiment, but this one is to help the very first one so far i know
hope this helps
Laurent
Hi all replicators
this is how i wound the Ufo assymetric 5 poles rotor
So you begin with uninsulating about 5 mm of your wire. ( i use a cigarette light than some sanding )
than you fix it to one of the collector hooking point and press it to definitiv fix it . ( for sake you can check with your meter if the collector plate is really connected to your wire )
than you point the axel right in your eyes and check on your copy of the Ufopolitics winding diagram.
And than you èlace the collector in the position as per the diagram.
Than you begin the winding exactly as per the diagram, and you wind 25 turns
At the end of this 25 turns , than you simply go on the winding , but this time , you cross the motor axel. so you make a V shape. and you go on the other 25 turns the same direction
and at the end you connect (of course you have uninsulated the last 5 mm of the wire ) to the oposit INLINE collector hooking point
of course a better tutorial will follow as we get further experiment, but this one is to help the very first one so far i know
hope this helps
Laurent










