Uploaded October 2025 | Updated September 2026, 2 weeks ago

---

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: fpvknowitall.com/ultimate-fpv-shopping-list

SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia

THIS IS MY FULL TIME JOB. Here are other ways that you can support me: fpvknowitall.com/support-me

---

00:00:00 - You can't build this 10" drone
00:01:11 - Test flight
00:05:28 - Overview of parts used
00:07:23 - Throw out the parts we're not using

Download and print my remixed screw gauge: thingiverse.com/thing:7158552

00:09:14 - Frame assembly

M3 screw assortment -- both cap and button head, and 4mm up to 35mm in size! amzn.to/4pKa68g

00:14:12 - Why install the standoffs first?
00:16:16 - Install the motors
00:17:09 - Connect the FC and ESC
00:24:53 - Solder the XT60

My soldering tutorial:
youtube.com/watch?v=GoPT69y98pY&list=PLl7Dyb_OGcakDQFSA5f4d0dl-1PSS7Gky

00:26:20 - Mount the ESC

The DeWalt driver I use: amzn.to/3KpA0y2

00:29:37 - Solder the motor wires
00:30:50 - Mount the FC
00:32:34 - Install the Vista
00:37:50 - Install the receiver
00:41:59 - Mount the camera
00:44:21 - Betaflight configuration

Sub250g FPV Drone Beginner Build Series -
youtube.com/watch?v=g26ASthCzvs&list=PLwoDb7WF6c8mEdPbe9yyCopFaoZL5K9f0