Uploaded March 2025 | Updated September 2026, 2 weeks ago
Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: fpvknowitall.com/ultimate-fpv-shopping-list
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: fpvknowitall.com/support-me
---
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Buy the Analog Sub250g build kit at:
* GetFPV - bit.ly/43typyA
* RaceDayQuads - bit.ly/4itk09K
Buy the HD-Ready Sub250g build kit at:
* GetFPV - bit.ly/3DeMwgJ
* RaceDayQuads - bit.ly/3Fh9Jzl
The O4 Lite camera adapter: you can print the file yourself with this STL: getfpv-media.s3.us-east-1.amazonaws.com/wysiwyg/files/DJI_O4_Air_Unit_Cam_Adapter.zip
Or purchase it here: getfpv.com/lumenier-camera-adapter-plates-for-dji-o4-air-unit-2pcs-offset.html
---
All videos in this series are in this playlist: youtube.com/watch?v=g26ASthCzvs&list=PLwoDb7WF6c8mEdPbe9yyCopFaoZL5K9f0
---
00:00:00 - This is part of a series
00:01:06 - Install the O4 on the FC stack
00:04:26 - Acthivate DJI and update firmware
Download DJI Assistant Consumer Drones Edition at:
dji.com/downloads/softwares/dji-assistant-2-consumer-drones-series
00:05:44 - Bind the vTX to the goggles
00:06:35 - Ham Unlock
Download the ham unlock file at: drive.google.com/file/d/1zaDDabQH4fjANcGxq39JzqYjlI8k3FNW/view?usp=sharing
00:08:33 - Install Betaflight Configurator
Download and install Betaflight Configurator:
youtube.com/watch?v=LkBWRiEGKTI
00:10:13 - FAILED TO OPEN SERIAL PORT
00:10:51 - Configure FC for On-Screen-Display (OSD)
set osd_canvas_width = 53
set osd_canvas_height = 20
save
00:15:29 - Lay out OSD elements
My Betaflight OSD Preset is: pastebin.com/wSquhCxt
00:17:16 - Install the camera plates
00:18:46 - Install the O4 camera
00:21:49 - Mount the O4 antenna (not yet though)
00:23:25 - Recap
Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: fpvknowitall.com/ultimate-fpv-shopping-list
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: fpvknowitall.com/support-me
---
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Buy the Analog Sub250g build kit at:
* GetFPV - bit.ly/43typyA
* RaceDayQuads - bit.ly/4itk09K
Buy the HD-Ready Sub250g build kit at:
* GetFPV - bit.ly/3DeMwgJ
* RaceDayQuads - bit.ly/3Fh9Jzl
The O4 Lite camera adapter: you can print the file yourself with this STL: getfpv-media.s3.us-east-1.amazonaws.com/wysiwyg/files/DJI_O4_Air_Unit_Cam_Adapter.zip
Or purchase it here: getfpv.com/lumenier-camera-adapter-plates-for-dji-o4-air-unit-2pcs-offset.html
---
All videos in this series are in this playlist: youtube.com/watch?v=g26ASthCzvs&list=PLwoDb7WF6c8mEdPbe9yyCopFaoZL5K9f0
---
00:00:00 - This is part of a series
00:01:06 - Install the O4 on the FC stack
00:04:26 - Acthivate DJI and update firmware
Download DJI Assistant Consumer Drones Edition at:
dji.com/downloads/softwares/dji-assistant-2-consumer-drones-series
00:05:44 - Bind the vTX to the goggles
00:06:35 - Ham Unlock
Download the ham unlock file at: drive.google.com/file/d/1zaDDabQH4fjANcGxq39JzqYjlI8k3FNW/view?usp=sharing
00:08:33 - Install Betaflight Configurator
Download and install Betaflight Configurator:
youtube.com/watch?v=LkBWRiEGKTI
00:10:13 - FAILED TO OPEN SERIAL PORT
00:10:51 - Configure FC for On-Screen-Display (OSD)
set osd_canvas_width = 53
set osd_canvas_height = 20
save
00:15:29 - Lay out OSD elements
My Betaflight OSD Preset is: pastebin.com/wSquhCxt
00:17:16 - Install the camera plates
00:18:46 - Install the O4 camera
00:21:49 - Mount the O4 antenna (not yet though)
00:23:25 - Recap
