Uploaded September 2021 | Updated September 2026, 1 week ago

---

I tried out the Ortur Laser Master 2 Pro and used it to cut a new Raspberry Pi case from 3mm plywood. The Laser Master 2 Pro is their latest upgrade to their popular Laser Master 2 and is available for purchase from the web store, Made The Best, for around $460 at the time of this review.

Visit my blog for my written review of the Ortur Laser Master 2 Pro, - the-diy-life.com/ortur-laser-master-2-pro-unboxing-and-review

Buy your own Laser Master 2 Pro - bit.ly/3tJdyDn

Get your own pre-cut plywood case kit - etsy.me/3z7kCLm

Plywood case assembly instructions - the-diy-life.com/laser-cut-plywood-raspberry-pi-case

How to Design a Case in Inkscape - youtu.be/Sd9NRY723do

What You Need For The Plywood Case Project
Raspberry Pi Plywood Case Kit – etsy.me/3z7kCLm
Raspberry Pi 4B – amzn.to/3C9AtuD
Low Profile Ice Tower – amzn.to/2YWtF5q
1TB NVME Drive – amzn.to/3C6Z0k4
NVME Drive USB C Adaptor – amzn.to/3huImmO
Argon Case Adaptor - amzn.to/3hvhaEk
Sandisk Extreme MicroSD Card 32GB - amzn.to/38JG4LB

Tools & Equipment Used
Ortur Laser Master 2 Pro - bit.ly/3tJdyDn
Cermark Metal Engraving Spray - amzn.to/3AdWIPu
PVA Glue - amzn.to/2X2VZ2w
Electric Screwdriver (Similar to mine, mine is out of stock) - amzn.to/3Emvo4m

Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, with no additional cost to you.

If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.