Michael Klements | Compact 3D Printed Raspberry Pi Case Using The Kywoo Tycoon Slim @MichaelKlements | Uploaded February 2022 | Updated October 2024, 9 hours ago.
In today’s video, we’re going to be using the new Kywoo Tycoon Slim 3D printer to print two new cases for my Raspberry Pis. I’ll be printing one in regular PLA to get an idea of the print quality that the Tycoon Slim can achieve and one in TPU, which is a flexible filament that is perfect for creating bump and drop resistant cases – but is also notoriously difficult to print with. The TPU version will be especially useful for Pi’s that you’re going to use for travelling, like a portable media server or NAS.
ADDITIONAL INFORMATION
---------------------------------------------------
Get your own Kywoo3D Tycoon Slim - bit.ly/3I2u0VM
Visit my blog for the full written build guide - the-diy-life.com/compact-3d-printed-raspberry-pi-case-using-the-kywoo3d-tycoon-slim
OLED stats display setup and programming - the-diy-life.com/add-an-oled-stats-display-to-raspberry-pi-os-bullseye
PURCHASE LINKS
---------------------------------------------------
Raspberry Pi 4b – amzn.to/3JFBCy1
32GB MicroSD Card - amzn.to/357VdHV
M2.5 x 12mm Brass Standoffs – amzn.to/3uYIYs9
M2.5 Button Head Screws & Nuts – amzn.to/3Bsmt09
M2.5 Brass Threaded Inserts – amzn.to/3BCR6jy
I2C OLED Display 128x32 – amzn.to/3oWj98v
30mm 5V Fan - amzn.to/3I246Bt
Aluminium Heatsink - amzn.to/3sN84aM
EQUIPMENT USED
---------------------------------------------------
Kywoo Tycoon Slim – bit.ly/3I2u0VM
TPU Filament – amzn.to/3oSTBsI
Electric Screwdriver (Similar) - amzn.to/2Yfnzg4
TS100 Soldering Iron - amzn.to/3IbQxPS
Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, with no additional cost to you.
CHAPTERS
---------------------------------------------------
0:00 Intro
0:28 Unboxing & Features
2:43 Test Prints
3:18 Designing The Case
3:53 Printing The Cases
5:23 Installing The Components
8:17 Final Thoughts
If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.
In today’s video, we’re going to be using the new Kywoo Tycoon Slim 3D printer to print two new cases for my Raspberry Pis. I’ll be printing one in regular PLA to get an idea of the print quality that the Tycoon Slim can achieve and one in TPU, which is a flexible filament that is perfect for creating bump and drop resistant cases – but is also notoriously difficult to print with. The TPU version will be especially useful for Pi’s that you’re going to use for travelling, like a portable media server or NAS.
ADDITIONAL INFORMATION
---------------------------------------------------
Get your own Kywoo3D Tycoon Slim - bit.ly/3I2u0VM
Visit my blog for the full written build guide - the-diy-life.com/compact-3d-printed-raspberry-pi-case-using-the-kywoo3d-tycoon-slim
OLED stats display setup and programming - the-diy-life.com/add-an-oled-stats-display-to-raspberry-pi-os-bullseye
PURCHASE LINKS
---------------------------------------------------
Raspberry Pi 4b – amzn.to/3JFBCy1
32GB MicroSD Card - amzn.to/357VdHV
M2.5 x 12mm Brass Standoffs – amzn.to/3uYIYs9
M2.5 Button Head Screws & Nuts – amzn.to/3Bsmt09
M2.5 Brass Threaded Inserts – amzn.to/3BCR6jy
I2C OLED Display 128x32 – amzn.to/3oWj98v
30mm 5V Fan - amzn.to/3I246Bt
Aluminium Heatsink - amzn.to/3sN84aM
EQUIPMENT USED
---------------------------------------------------
Kywoo Tycoon Slim – bit.ly/3I2u0VM
TPU Filament – amzn.to/3oSTBsI
Electric Screwdriver (Similar) - amzn.to/2Yfnzg4
TS100 Soldering Iron - amzn.to/3IbQxPS
Some of the above parts are affiliate links. By purchasing products through the above links, you’ll be supporting this channel, with no additional cost to you.
CHAPTERS
---------------------------------------------------
0:00 Intro
0:28 Unboxing & Features
2:43 Test Prints
3:18 Designing The Case
3:53 Printing The Cases
5:23 Installing The Components
8:17 Final Thoughts
If you've got any ideas for Raspberry Pi, Arduino, or other Electronics projects or tutorials you'd like to see, let me know in the comments section.
