Gregs Maker Corner | Hypercube Evolution - Part 5, Y Axis @GregsMakerCorner | Uploaded October 2019 | Updated October 2024, 2 hours ago.
This is Part 5 of my Hypercube Evolution Build. In this video, I walk through assembling the Y axis and installing it into the frame. The Y axis was pretty simple, and probably the easiest part of the project.
View Part 1 here for more information about a Hypercube Evolution, and some of the initial planning:
youtube.com/watch?v=e_x-sPSRD4g
Link to build kit:
Original Zyltech Kit:
zyltech.com/zyltechs-full-diy-hypercube-evolution-300x300x400-3d-printer-kit
Kit from BD3d Customs:
bd3dcustoms.com/collections/printers/products/zyltech-hypercube-evolution?variant=22563871293540
Recommended Resources
Proper Screws and locations:
lookaside.fbsbx.com/file/M3-Bolt-Overview.pdf?token=AWzP8I8TOUJp5TOzFbAvFtqgr7kT7u23bk59Kwee73_ql8iOb1cSpSjfCYu_35levpmldyUBTx9ovQdEENnWxxGCLRnX8iZHX9vaw3IvuXArelDt89_YcOOMq4Csa09KteDNZvow7yv5a1jy_QhlIq7X
Da Hai Zhu's videos:
youtube.com/playlist?list=PLJX30NW4d60PdxcPWZcrLxaXvndv3tkGq
HEVO Wiki Incremental build instructions (only good for Y axis):
https://hevo.wiki/index.php/Incremental_Build_Instructions:Y-Axis
Small files that I use (About $8 on Amazon):
amazon.com/Needle-HIGHEST-QUALITY-Hardened-Strength/dp/B01MRCZKIX/ref=pd_lpo_sbs_469_t_0?_encoding=UTF8&psc=1&refRID=EP0T5DZS90FJS9V17AKS
This is Part 5 of my Hypercube Evolution Build. In this video, I walk through assembling the Y axis and installing it into the frame. The Y axis was pretty simple, and probably the easiest part of the project.
View Part 1 here for more information about a Hypercube Evolution, and some of the initial planning:
youtube.com/watch?v=e_x-sPSRD4g
Link to build kit:
Original Zyltech Kit:
zyltech.com/zyltechs-full-diy-hypercube-evolution-300x300x400-3d-printer-kit
Kit from BD3d Customs:
bd3dcustoms.com/collections/printers/products/zyltech-hypercube-evolution?variant=22563871293540
Recommended Resources
Proper Screws and locations:
lookaside.fbsbx.com/file/M3-Bolt-Overview.pdf?token=AWzP8I8TOUJp5TOzFbAvFtqgr7kT7u23bk59Kwee73_ql8iOb1cSpSjfCYu_35levpmldyUBTx9ovQdEENnWxxGCLRnX8iZHX9vaw3IvuXArelDt89_YcOOMq4Csa09KteDNZvow7yv5a1jy_QhlIq7X
Da Hai Zhu's videos:
youtube.com/playlist?list=PLJX30NW4d60PdxcPWZcrLxaXvndv3tkGq
HEVO Wiki Incremental build instructions (only good for Y axis):
https://hevo.wiki/index.php/Incremental_Build_Instructions:Y-Axis
Small files that I use (About $8 on Amazon):
amazon.com/Needle-HIGHEST-QUALITY-Hardened-Strength/dp/B01MRCZKIX/ref=pd_lpo_sbs_469_t_0?_encoding=UTF8&psc=1&refRID=EP0T5DZS90FJS9V17AKS