@WoodpeckersLLC

@WoodpeckersLLC

Woodpeckers | How to use the Cam-A-Line Dowel Guide + Helpful Layout Tips: End Table Build PT. 1 @WoodpeckersLLC | Uploaded July 2024 | Updated October 2024, 4 hours ago.
In this 12-minute video, Jay Mowder shows you how to build a simple end table using the Cam-A-Line Dowel Guide. He walks you through a highly organized layout process that'll help to keep your project right on track. Along the way you'll learn all the ins and outs of the Cam-A-Line as well as several tips and tricks of how to get the most out of it. Be sure to check out this video to see how the indexing system on the Cam-A-Line Dowel Guide makes it possibly the best dowel jig ever!

Cam-A-Line Dowel Guide
woodpeck.com/cam-a-line-dowel-guide.html?utm_source=YouTube&utm_medium=RedTool+Woodshop&utm_campaign=Cam-A-Line-JAY-07-2024
SKU: CAL-DEL

Setup Blocks
woodpeck.com/setup-blocks.html?utm_source=YouTube&utm_medium=RedTool+Woodshop&utm_campaign=Cam-A-Line-JAY-07-2024
SKU: SUB42W-22

3" Pocket T-Square
woodpeck.com/woodpeckers-pocket-t-squares.html?utm_source=YouTube&utm_medium=RedTool+Woodshop&utm_campaign=Cam-A-Line-JAY-07-2024
SKU: TS-3-2020

4" Saddle-T Square
woodpeck.com/saddle-t-square.html?utm_source=YouTube&utm_medium=RedTool+Woodshop&utm_campaign=Cam-A-Line-JAY-07-2024
SKU: SDLT0419

SJOBERGS SMART WORKSTATION PRO
woodpeck.com/sjobergs-smart-workstation-pro.html?utm_source=YouTube&utm_medium=RedTool+Woodshop&utm_campaign=Cam-A-Line-JAY-07-2024
SKU SJO-33309

AutoScale Miter Sled
woodpeck.com/autoscale-miter-sled.html?utm_source=YouTube&utm_medium=RedTool+Woodshop&utm_campaign=Cam-A-Line-JAY-07-2024
SKU: ASMS-L
SKU: ASMS-D

How to use the Cam-A-Line Dowel Guide + Helpful Layout Tips: End Table Build PT. 1

Speed up your pattern projects with the SteadyCurve Bandsaw Template Guide 🔥 #woodpeckerstools

Stop making a mess when freehand routing! Use the freehand guard instead! #shorts #woodpeckerstools

StabilMaxRT: The Ultimate Upgrade For Your Trim Router

Store up to 72 router bits right at your router table! #routerbit #shorts #woodpeckerstools #wood

$Flatten slabs the easy way with the Slab Flattening Mill Pro #shorts #woodpeckerstools 🚨New RedTool Woodshop YouTube Video 🚨 Looking for the ideal garage workshop setup for the Slab Flattening Mill∙PRO? Look no further. In this 6-minute video, Jay Mowder shares a few crucial setup tips to help you get the most out of your Slab Flattener. He walks you through the process of flattening a live-edge slab, as well as six end-grain cutting boards at once! If the Slab Flattening Mill∙PRO is on your list of tools to buy, or if you already own one...you don’t want to miss this insightful video! Woodpeckers Slab Flattening Mill PRO guides your router over your slab in a controlled plane. Since you’re using a router instead of a planer-style cutterhead, tear-out is minimal… and thanks to our uniquely engineered rails and enhanced solid steel carriage, the surface will only need a light sanding afterwards. The router carriage adjust in height by a full 2-1/2”. Depending on your router bit, you can work on stock just a fraction of an inch thick or up to 3-3/8” without ever shimming either the rails or slab. With the Basic Slab Flattening Mill Pro, you can mill a slab up to 58” long! The Extended version adds a second set of rails, extending the maximum slab length to 134” 👍🏼 If youd like to learn more about the Slab Flattening Mill Pro, copy and paste the link below into your web browser. https://www.woodpeck.com/woodpeckers-slab-flattening-mill-pro.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=SLABFLAT-JAY-06-2024 Tools Used: 1️⃣ Basic Slab Flattening Mill Pro SKU: SLBFPRO-BAS 2️⃣ Extended Slab Flattening Mill Pro SKU: SLBFPRO-XL 3️⃣ Ultra-Shear 2” Carbide Insert Slab Flattening Spoil Board Router Bit SKU: US203SF #woodworking #slab #slabflattening #slabflatteningmill #woodworkingskills #woodpeckerstools #flatten #sawdust #router #routerjig #routerbits #maker #makersgonnamake$ $SteadyCurve does for your band saw what a pattern bit does for your router #shorts #woodpeckerstools SteadyCurve Does for Your Band Saw What a Pattern Bit Does for Your Router! Position SteadyCurve on your band saw table with the amount of blade offset you want, lock the MagSwitch clamps and you’re ready to cut. Instead of trying to follow a traced-out line, just keep the pattern against the SteadyCurve as you move along the contour. Then trim the remaining fraction of an inch off with your router, faster and smoother than ever before because the depth of cut is minimized and consistent. SteadyCurve comes with replaceable template followers for 1/4” and 1/8” blades and works with any band saw with a cast iron or steel table and at least 12” of throat clearance. To learn more about the SteadyCurve Band Saw Template Guide, copy and paste the link below in your web browser! https://www.woodpeck.com/steadycurve-band-saw-template-guide.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=SteadyCurve-JAY-06-2024 Tools Used: 1️⃣ SteadyCurve - includes 1/8” and 1/4” guides SKU: SC-22$

StabilmaxRT Router Table System Production Update

Elevate Your Projects With Tapers and Curves: End Table Build PT. 2

Get flawless crosscuts in the TRICKIEST hardwoods with Ultra Shear 80 Tooth Miter Saw Blade #shorts

MagQuick Dust Ports, just snap on and snap off! #woodworking #woodpeckerstools

Box Joints are quick and easy with the Multi-Router! #multirouter #woodpeckerstools #woodworking

How to use the Cam-A-Line Dowel Guide + Helpful Layout Tips: End Table Build PT. 1 @WoodpeckersLLC