Speed up your pattern projects with the SteadyCurve Bandsaw Template Guide 🔥 #woodpeckerstools @WoodpeckersLLC

Woodpeckers | Speed up your pattern projects with the SteadyCurve Bandsaw Template Guide 🔥 #woodpeckerstools @WoodpeckersLLC | Uploaded October 2024 | Updated October 2024, 4 hours ago.
Rough-cut your pattern projects faster and more accurately with the Steady Curve Band Saw Template Guide!

Look at these exclusive SteadyCurve features:

• MagSwitch clamps allow easy positioning and instant locking of the SteadyCurve on your table.
• Template follower adjusts vertically for material as thin as 1/4” and up to 4”.
• Molded template followers won’t damage blades and are easily replaced when worn.
• Works with all 12” and larger band saws... with or without table extension.
• Corrosion-resistant materials and finishes used throughout for a lifetime of service.

SteadyCurve works with all types of templates, commercially made or shop made, plastic, MDF or plywood. Whatever attachment system you’re using for your router will work for SteadyCurve, too (we preter double-faced tape). SteadyCurve makes every contoured project go faster and smoother, and your finished parts will be more accurate.

To learn more about the SteadyCurve or order one for yourself, head over to our website woodpeck.com or copy and paste the link below into your web browser!

woodpeck.com/steadycurve-band-saw-template-guide.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=SC-22-JAY-10-2024

TOOLS USED
SteadyCurve Band Saw Template Guide
SKU: SC-22

#woodworking #woodworker #woodworkingvideo #bandsaw #woodworkingtools #woodworkingjigs #woodworkersofinstagram #makersgonnamake #woodshop #woodworkingjigs #woodworkingskills #woodworkingprojects #woodpeckerstools #satisfyingvideos #satisfying #cuttingboards #templates

Stop making a mess when freehand routing! Use the freehand guard instead! #shorts #woodpeckerstools

StabilMaxRT: The Ultimate Upgrade For Your Trim Router

Store up to 72 router bits right at your router table! #routerbit #shorts #woodpeckerstools #wood

$Flatten slabs the easy way with the Slab Flattening Mill Pro #shorts #woodpeckerstools 🚨New RedTool Woodshop YouTube Video 🚨 Looking for the ideal garage workshop setup for the Slab Flattening Mill∙PRO? Look no further. In this 6-minute video, Jay Mowder shares a few crucial setup tips to help you get the most out of your Slab Flattener. He walks you through the process of flattening a live-edge slab, as well as six end-grain cutting boards at once! If the Slab Flattening Mill∙PRO is on your list of tools to buy, or if you already own one...you don’t want to miss this insightful video! Woodpeckers Slab Flattening Mill PRO guides your router over your slab in a controlled plane. Since you’re using a router instead of a planer-style cutterhead, tear-out is minimal… and thanks to our uniquely engineered rails and enhanced solid steel carriage, the surface will only need a light sanding afterwards. The router carriage adjust in height by a full 2-1/2”. Depending on your router bit, you can work on stock just a fraction of an inch thick or up to 3-3/8” without ever shimming either the rails or slab. With the Basic Slab Flattening Mill Pro, you can mill a slab up to 58” long! The Extended version adds a second set of rails, extending the maximum slab length to 134” 👍🏼 If youd like to learn more about the Slab Flattening Mill Pro, copy and paste the link below into your web browser. https://www.woodpeck.com/woodpeckers-slab-flattening-mill-pro.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=SLABFLAT-JAY-06-2024 Tools Used: 1️⃣ Basic Slab Flattening Mill Pro SKU: SLBFPRO-BAS 2️⃣ Extended Slab Flattening Mill Pro SKU: SLBFPRO-XL 3️⃣ Ultra-Shear 2” Carbide Insert Slab Flattening Spoil Board Router Bit SKU: US203SF #woodworking #slab #slabflattening #slabflatteningmill #woodworkingskills #woodpeckerstools #flatten #sawdust #router #routerjig #routerbits #maker #makersgonnamake$ $SteadyCurve does for your band saw what a pattern bit does for your router #shorts #woodpeckerstools SteadyCurve Does for Your Band Saw What a Pattern Bit Does for Your Router! Position SteadyCurve on your band saw table with the amount of blade offset you want, lock the MagSwitch clamps and you’re ready to cut. Instead of trying to follow a traced-out line, just keep the pattern against the SteadyCurve as you move along the contour. Then trim the remaining fraction of an inch off with your router, faster and smoother than ever before because the depth of cut is minimized and consistent. SteadyCurve comes with replaceable template followers for 1/4” and 1/8” blades and works with any band saw with a cast iron or steel table and at least 12” of throat clearance. To learn more about the SteadyCurve Band Saw Template Guide, copy and paste the link below in your web browser! https://www.woodpeck.com/steadycurve-band-saw-template-guide.html?utm_source=YouTube&utm_medium=Shorts&utm_campaign=SteadyCurve-JAY-06-2024 Tools Used: 1️⃣ SteadyCurve - includes 1/8” and 1/4” guides SKU: SC-22$

StabilmaxRT Router Table System Production Update

Elevate Your Projects With Tapers and Curves: End Table Build PT. 2

Get flawless crosscuts in the TRICKIEST hardwoods with Ultra Shear 80 Tooth Miter Saw Blade #shorts

MagQuick Dust Ports, just snap on and snap off! #woodworking #woodpeckerstools

Box Joints are quick and easy with the Multi-Router! #multirouter #woodpeckerstools #woodworking

Ultra-Shear Carbide Tipped Juice Groove Bits | Woodpeckers Tools