Uploaded December 2016 | Updated September 2026, 2 weeks ago
Audio Play in Proteus
In this video we are playing audio, for that we required speaker, audio generator and voltage probe. Connect speaker one terminal with audio generator and another with ground. Voltage probe is connected between speaker and audio generator. Oscilloscope probe A is connected with input audio. This audio input is called Audio Generator in Proteus and is found in the Generator Mode panel. When you double click it you will find the following. In the WAV audio file setting you can see the browse button which you can click and select the audio file. The audio file must be however .wav file. But you can change any audio file like mp3 to .wav file with a sound converter. And once you have selected the audio file, you should set the amplitude level.At the output of the circuit you can see a sound speaker. This is found in the proteus library. Just type speaker in the library search box. When you hit the simulation run button then you can hear the sound in real time. The Analogue analysis shows the wave simulation which given to the generator. Changes according to the input given to the generator. The speaker input voltage is 10V.
The three types of output are shows in a video i.e. Audio wave, sine wave and pulse wave. For audio wave click on the generator and edit properties like select audio then go to browser select audio wave file then edit analogue analysis properties like start time is zero to stop time 5 seconds and simulate it. For sine wave change the properties of generator such as amplitude 5v and frequency is 1khz then edit analogue analysis properties i.e. start time is zero to stop time 50 milliseconds and simulate it. For pulse wave change the properties of generator such as amplitude 5v and frequency is 1khz then edit analogue analysis properties i.e. start time is zero to stop time 50 milliseconds and simulate it. The all output we get i.e. audio wave, sine wave and pulse wave.
____________________________________________________
Audio Source :-
Distrion& Alex Skrindo - Entropy [NCS Release]
this music is provided by NCS, the link to the track is
youtu.be/iaKgF1Vf5bQ
______________________________________________________
Download File From Link Below
mediafire.com/file/0v15b6ayg21z0v9/Audio_proteus.zip
_______________________________________________________
Download Proteus Latest Version
labcenter.com
_______________________________________________________
TISHITU
ISO: 9001-2008
RESEARCH AND CONSULTANCY CELL OF INDUSTRIAL APPLICATION
A Joint Accreditation System of Australia and New Zealand
Copyright © All Rights Reserved tishitu.org Reg No.08122629691/SSI
Accreditation No. M3111204IN
-~-~~-~~~-~~-~-
Please watch: "Lifi Communication by Arduino UNO Download Project"
youtube.com/watch?v=c4gC8dbaiZg
-~-~~-~~~-~~-~-
Audio Play in Proteus
In this video we are playing audio, for that we required speaker, audio generator and voltage probe. Connect speaker one terminal with audio generator and another with ground. Voltage probe is connected between speaker and audio generator. Oscilloscope probe A is connected with input audio. This audio input is called Audio Generator in Proteus and is found in the Generator Mode panel. When you double click it you will find the following. In the WAV audio file setting you can see the browse button which you can click and select the audio file. The audio file must be however .wav file. But you can change any audio file like mp3 to .wav file with a sound converter. And once you have selected the audio file, you should set the amplitude level.At the output of the circuit you can see a sound speaker. This is found in the proteus library. Just type speaker in the library search box. When you hit the simulation run button then you can hear the sound in real time. The Analogue analysis shows the wave simulation which given to the generator. Changes according to the input given to the generator. The speaker input voltage is 10V.
The three types of output are shows in a video i.e. Audio wave, sine wave and pulse wave. For audio wave click on the generator and edit properties like select audio then go to browser select audio wave file then edit analogue analysis properties like start time is zero to stop time 5 seconds and simulate it. For sine wave change the properties of generator such as amplitude 5v and frequency is 1khz then edit analogue analysis properties i.e. start time is zero to stop time 50 milliseconds and simulate it. For pulse wave change the properties of generator such as amplitude 5v and frequency is 1khz then edit analogue analysis properties i.e. start time is zero to stop time 50 milliseconds and simulate it. The all output we get i.e. audio wave, sine wave and pulse wave.
____________________________________________________
Audio Source :-
Distrion& Alex Skrindo - Entropy [NCS Release]
this music is provided by NCS, the link to the track is
youtu.be/iaKgF1Vf5bQ
______________________________________________________
Download File From Link Below
mediafire.com/file/0v15b6ayg21z0v9/Audio_proteus.zip
_______________________________________________________
Download Proteus Latest Version
labcenter.com
_______________________________________________________
TISHITU
ISO: 9001-2008
RESEARCH AND CONSULTANCY CELL OF INDUSTRIAL APPLICATION
A Joint Accreditation System of Australia and New Zealand
Copyright © All Rights Reserved tishitu.org Reg No.08122629691/SSI
Accreditation No. M3111204IN
-~-~~-~~~-~~-~-
Please watch: "Lifi Communication by Arduino UNO Download Project"
youtube.com/watch?v=c4gC8dbaiZg
-~-~~-~~~-~~-~-
