Uploaded May 2025 | Updated September 2026, 2 weeks ago
laptopscreen.com/English
laptopscreen.com/English/brand/Dell
Dell Inspiron 7501 screen replacement
This is a guide on replacing a screen on Dell Inspiron 7501
For the replacement process we'll need a plastic pick
To begin turn off the laptop and disconnect the power cord.
Using plastic pick pry off the bezel on the inner edge of a bezel.
Co around the perimeter unsnapping the tabs underneath.
Put the bezel aside.
Separate the LCD screen and place it on the keyboard. Peel off
the clear tape securing the video connector. Using plastic pick
open the connector's bracket. Disconnect the video cable.
Discard the old screen
Place the new screen on the keyboard. Reconnect the video cable.
Close the connector's bracket. Secure it with clear tape.
CAUTION! It is very important not to force any connectors. Also
make sure not to twist or slant the connector when plugging it in.
In order order to secure the screen in the back cover we applied
a set of adhesive strips which you can buy on our site:
laptopscreen.com
Lift the screen up and apply some pressure on the sides.
Reconnect the power cord and test the new screen. The screen is
working and we can finish reinstallation process.
Replace the bezel. Insert it in the bottom and then go around the
perimeter snapping the tabs back in place.
Turn the laptop on, and we are done!
laptopscreen.com/English
laptopscreen.com/English/brand/Dell
Dell Inspiron 7501 screen replacement
This is a guide on replacing a screen on Dell Inspiron 7501
For the replacement process we'll need a plastic pick
To begin turn off the laptop and disconnect the power cord.
Using plastic pick pry off the bezel on the inner edge of a bezel.
Co around the perimeter unsnapping the tabs underneath.
Put the bezel aside.
Separate the LCD screen and place it on the keyboard. Peel off
the clear tape securing the video connector. Using plastic pick
open the connector's bracket. Disconnect the video cable.
Discard the old screen
Place the new screen on the keyboard. Reconnect the video cable.
Close the connector's bracket. Secure it with clear tape.
CAUTION! It is very important not to force any connectors. Also
make sure not to twist or slant the connector when plugging it in.
In order order to secure the screen in the back cover we applied
a set of adhesive strips which you can buy on our site:
laptopscreen.com
Lift the screen up and apply some pressure on the sides.
Reconnect the power cord and test the new screen. The screen is
working and we can finish reinstallation process.
Replace the bezel. Insert it in the bottom and then go around the
perimeter snapping the tabs back in place.
Turn the laptop on, and we are done!










