Uploaded June 2024 | Updated September 2026, 2 weeks ago

---

laptopscreen.com
laptopscreen.com/English/brand/Acer

This is a guide on a replacing a screen on an Acer TravelMate P658 series

For the replacement process we'll need a

- couple of plastic picks
- and a Phillips screwdriver.

To begin turn off the laptop and disconnect the power cord.

Using plastic picks start separating the bezel. Using both hands pull the bezel
away from the screen unsnapping the tabs underneath. Go around the perimeter.
Put the bezel away.

Using Phillips screwdriver remove four Phillips screws holding the screen in place.
Place the screen on the keyboard. Peel off the clear tape securing the video connector.
Disconnect the cable and discard the old screen.

Place the new screen on the keyboard. Reconnect the video cable. Secure it with
clear tape.

CAUTION! It is very important not to force any connectors. Also make sure not
to twist or slant the connector when plugging it in.

Lift the screen up and lean it on the back cover. Test the new screen.
The start up graphics appear and we can finish reinstallation process.

Replace four Phillips screws holding the screen in place. Wipe the screen with microfiber
cloth to remove any fingerprints.

Replace the bezel. Press firmly near the hinge covers and then go along the perimeter
snapping the tabs back in place. Close the laptop and make sure that the bezel is snapped
along the bottom edge of the screen.

Turn the laptop on and we are done!