Uploaded July 2021 | Updated September 2026, 1 week ago
1. Set x-axis (frequency) interval to octaves.
2. Locate the peak for the filter.
3. Find -3dB on each side of the peak. Is it less or more than an octave?
As the filter peak approaches 3dB, it will no longer use -3dB for the BW calculation. That's about as far as my understanding goes at the moment.
This might be helpful: andyc.diy-audio-engineering.org/parametric-eq-parameters-2.html
___
💙 Start supporting Sound Design Live today for as little as $5/month on Patreon: patreon.com/sounddesignlive
___
📈 Get Started with Sound System Tuning - sounddesignlive.com/get-started-with-sound-system-tuning
___
👨🎓 SOUND SYSTEM TUNING ONLINE COURSE - proaudioworkshopseeingsound.com
___
📕 Books on sound system tuning - sounddesignlive.com/audio-engineer-training-programs
🎙 Podcast for live sound engineers - sounddesignlive.com/pro-audio-podcast
___
Smaart® and the Smaart logo are registered trademarks of Rational Acoustics LLC and are not affiliated with Nathan Lively or Sound Design Live.
___
Be friendly
Facebook - facebook.com/sounddesignlive
Twitter - twitter.com/nathandofrango
LinkedIn - linkedin.com/in/nathanlively
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
1. Set x-axis (frequency) interval to octaves.
2. Locate the peak for the filter.
3. Find -3dB on each side of the peak. Is it less or more than an octave?
As the filter peak approaches 3dB, it will no longer use -3dB for the BW calculation. That's about as far as my understanding goes at the moment.
This might be helpful: andyc.diy-audio-engineering.org/parametric-eq-parameters-2.html
___
💙 Start supporting Sound Design Live today for as little as $5/month on Patreon: patreon.com/sounddesignlive
___
📈 Get Started with Sound System Tuning - sounddesignlive.com/get-started-with-sound-system-tuning
___
👨🎓 SOUND SYSTEM TUNING ONLINE COURSE - proaudioworkshopseeingsound.com
___
📕 Books on sound system tuning - sounddesignlive.com/audio-engineer-training-programs
🎙 Podcast for live sound engineers - sounddesignlive.com/pro-audio-podcast
___
Smaart® and the Smaart logo are registered trademarks of Rational Acoustics LLC and are not affiliated with Nathan Lively or Sound Design Live.
___
Be friendly
Facebook - facebook.com/sounddesignlive
Twitter - twitter.com/nathandofrango
LinkedIn - linkedin.com/in/nathanlively
___
I love to geek out about the physics of sound. This channel focuses on the growing opportunity for live sound engineers to improve their confidence and consistency through the understanding of the principles of sound system design and optimization. My goal is to make this channel upfront and honest about my success and failure, so you can learn from both.
I am always open to suggestions and feedback so please comment on this video or contact me through my site.
