Uploaded September 2014 | Updated November 2026, 48 minutes ago
Gear & Studio Setup List: vonmalegowski.blogspot.com/2020/06/von-malegowskis-equipment-list-2020.html
This tutorial shows how to make a simple floating water candle using a glass jar, water, cooking oil, and a small piece of plastic. Because oil is less dense than water, it floats in a clean layer on top and fuels a suspended wick for hours. It is a quick, inexpensive project that works well as a decorative centerpiece or an emergency light source during a power outage.
To put it together, fill a glass jar with water while leaving about a centimeter of space near the top, dropping in any decorative stones or items you want at the bottom first. Pour enough cooking oil over the water to form a solid layer across the surface. Cut a small disk out of thin plastic (like a food container lid) so it fits comfortably inside the jar, poke a hole in the center, and thread a knotted candle wick through it. Lower the plastic disk into the jar so it rests suspended in the oil layer, trim the wick if needed so only a short tip sticks out above the surface, and light it up.
Materials
Cooking oil (olive oil, vegetable oil, or canola oil)
Water
Glass jar or heat-safe container
Candle wick
Thin plastic disk (cut from a container lid or bottle)
Always place the jar on a flat, heat-resistant surface before lighting; avoid moving it while the oil is burning so the oil and water don't mix or spill, and never leave an open flame unattended.
Music:
Artist: Alex
Track: "Drive"
ccmixter.org/files/AlexBeroza/43098http://ccmixter.org/people/AlexBeroza
Creative Commons license
creativecommons.org/licenses/by/3.0
#WaterCandle #DIYCandle #EmergencyCandle
©Von Malegowski. All Rights Reserved.
Gear & Studio Setup List: vonmalegowski.blogspot.com/2020/06/von-malegowskis-equipment-list-2020.html
This tutorial shows how to make a simple floating water candle using a glass jar, water, cooking oil, and a small piece of plastic. Because oil is less dense than water, it floats in a clean layer on top and fuels a suspended wick for hours. It is a quick, inexpensive project that works well as a decorative centerpiece or an emergency light source during a power outage.
To put it together, fill a glass jar with water while leaving about a centimeter of space near the top, dropping in any decorative stones or items you want at the bottom first. Pour enough cooking oil over the water to form a solid layer across the surface. Cut a small disk out of thin plastic (like a food container lid) so it fits comfortably inside the jar, poke a hole in the center, and thread a knotted candle wick through it. Lower the plastic disk into the jar so it rests suspended in the oil layer, trim the wick if needed so only a short tip sticks out above the surface, and light it up.
Materials
Cooking oil (olive oil, vegetable oil, or canola oil)
Water
Glass jar or heat-safe container
Candle wick
Thin plastic disk (cut from a container lid or bottle)
Always place the jar on a flat, heat-resistant surface before lighting; avoid moving it while the oil is burning so the oil and water don't mix or spill, and never leave an open flame unattended.
Music:
Artist: Alex
Track: "Drive"
ccmixter.org/files/AlexBeroza/43098http://ccmixter.org/people/AlexBeroza
Creative Commons license
creativecommons.org/licenses/by/3.0
#WaterCandle #DIYCandle #EmergencyCandle
©Von Malegowski. All Rights Reserved.










