Uploaded October 2026 | Updated November 2026, 4 days ago
How to Fix Samsung Galaxy Black Screen but Phone Is Still On
If your Samsung Galaxy screen is completely black but the phone is still powered on, you may hear notifications, feel vibrations, receive calls, or hear sounds when pressing buttons. This can happen because of a software crash, display problem, battery issue, or faulty hardware.
In this video, we'll go through 15 troubleshooting methods to help get your screen working again without unnecessarily erasing your data.
15 ways to fix a Samsung Galaxy black screen
1. Force restart your Samsung Galaxy
This should be the first thing you try. Sometimes the phone is running, but the display software has frozen.
1. Press and hold the Side button and Volume Down button together.
2. Keep holding them for approximately 10–20 seconds.
3. Release the buttons when the Samsung logo appears.
4. Allow the phone to restart.
This normally does not erase any personal information.
2. Charge your phone
Even if the phone appears to be on, a critically low battery can cause display or startup problems.
1. Connect your phone to a working wall charger.
2. Use a known-good charging cable and adapter.
3. Leave it charging for at least 30 minutes.
4. Try the force restart again.
If possible, test another charger and cable.
3. Check whether the screen brightness is extremely low
Your display might be working, but the brightness could be turned all the way down.
1. Swipe down from the top of the screen twice.
2. Try locating the brightness slider.
3. Move it toward maximum brightness.
This is difficult to do with a completely black display, but it may help if you can faintly see the screen or use an external display where supported.
4. Check whether the phone is actually responding
Try calling your Samsung Galaxy from another phone.
- If it rings, vibrates, or receives notifications, the phone is probably still operating.
- If you hear sounds but cannot see anything, the display or its connection may be the problem.
- If there is no response at all, the phone may have a deeper power or hardware issue.
5. Remove the case and screen protector
A damaged or improperly fitted case or screen protector can sometimes interfere with buttons or sensors.
1. Remove the protective case.
2. Remove any accessories attached to the phone.
3. Check whether the Side and Volume buttons move freely.
4. Try restarting the phone again.
6. Disconnect all accessories
Disconnect USB-C cables, headphones, adapters, external storage, and other accessories.
A malfunctioning accessory can occasionally interfere with normal operation. Restart the phone with nothing connected.
7. Check for overheating
If your phone has become extremely hot, it may temporarily restrict operation or shut down parts of the device to protect itself.
1. Disconnect the charger.
2. Remove the case.
3. Place the phone somewhere cool and dry.
4. Let it return to normal temperature.
5. Try turning the display on again.
Do not put the phone in a refrigerator or freezer.
8. Try entering Safe Mode
A problematic downloaded app can sometimes cause display problems.
If you can get the screen working long enough to use the power menu:
1. Open the power menu.
2. Touch and hold Power off.
3. Select Safe mode.
4. See whether the black-screen problem returns.
If the display works normally in Safe Mode, a recently installed app may be responsible. Restart normally to exit Safe Mode.
9. Try connecting your phone to a computer
This can help determine whether the phone is still communicating with external devices.
1. Connect your Galaxy to a computer using a USB data cable.
2. Check whether the computer recognizes the phone.
3. If it does, the phone may still be functioning even though the display is black.
Note that file access may require the phone to be unlocked and the USB connection to be authorized. A computer not recognizing it does not necessarily mean the phone is dead.
10. Try using a USB-C mouse
If the phone is operating but its touchscreen or display is unusable, an external mouse may help in certain situations.
1. Obtain a compatible USB-C OTG adapter.
2. Connect a USB mouse to the adapter.
3. Connect the adapter to your Galaxy.
4. If the display becomes visible, try using the mouse to navigate.
This is most useful when the display is faintly visible or intermittently working. It will not fix a completely failed display panel.
11. Check for a display problem after a drop
Think about whether the phone was recently dropped, bent, or exposed to water.
Look for:
- Cracks in the display.
- Flickering before the screen went black.
- Colored lines or unusual patches.
- A display that briefly lights up and then goes black.
A damaged display panel or internal display connector may need professional repair.
12. Try Samsung Recovery Mode #samsunggalaxy
Disclaimer: As an Amazon Associate I earn from qualified purchases.
How to Fix Samsung Galaxy Black Screen but Phone Is Still On
If your Samsung Galaxy screen is completely black but the phone is still powered on, you may hear notifications, feel vibrations, receive calls, or hear sounds when pressing buttons. This can happen because of a software crash, display problem, battery issue, or faulty hardware.
In this video, we'll go through 15 troubleshooting methods to help get your screen working again without unnecessarily erasing your data.
15 ways to fix a Samsung Galaxy black screen
1. Force restart your Samsung Galaxy
This should be the first thing you try. Sometimes the phone is running, but the display software has frozen.
1. Press and hold the Side button and Volume Down button together.
2. Keep holding them for approximately 10–20 seconds.
3. Release the buttons when the Samsung logo appears.
4. Allow the phone to restart.
This normally does not erase any personal information.
2. Charge your phone
Even if the phone appears to be on, a critically low battery can cause display or startup problems.
1. Connect your phone to a working wall charger.
2. Use a known-good charging cable and adapter.
3. Leave it charging for at least 30 minutes.
4. Try the force restart again.
If possible, test another charger and cable.
3. Check whether the screen brightness is extremely low
Your display might be working, but the brightness could be turned all the way down.
1. Swipe down from the top of the screen twice.
2. Try locating the brightness slider.
3. Move it toward maximum brightness.
This is difficult to do with a completely black display, but it may help if you can faintly see the screen or use an external display where supported.
4. Check whether the phone is actually responding
Try calling your Samsung Galaxy from another phone.
- If it rings, vibrates, or receives notifications, the phone is probably still operating.
- If you hear sounds but cannot see anything, the display or its connection may be the problem.
- If there is no response at all, the phone may have a deeper power or hardware issue.
5. Remove the case and screen protector
A damaged or improperly fitted case or screen protector can sometimes interfere with buttons or sensors.
1. Remove the protective case.
2. Remove any accessories attached to the phone.
3. Check whether the Side and Volume buttons move freely.
4. Try restarting the phone again.
6. Disconnect all accessories
Disconnect USB-C cables, headphones, adapters, external storage, and other accessories.
A malfunctioning accessory can occasionally interfere with normal operation. Restart the phone with nothing connected.
7. Check for overheating
If your phone has become extremely hot, it may temporarily restrict operation or shut down parts of the device to protect itself.
1. Disconnect the charger.
2. Remove the case.
3. Place the phone somewhere cool and dry.
4. Let it return to normal temperature.
5. Try turning the display on again.
Do not put the phone in a refrigerator or freezer.
8. Try entering Safe Mode
A problematic downloaded app can sometimes cause display problems.
If you can get the screen working long enough to use the power menu:
1. Open the power menu.
2. Touch and hold Power off.
3. Select Safe mode.
4. See whether the black-screen problem returns.
If the display works normally in Safe Mode, a recently installed app may be responsible. Restart normally to exit Safe Mode.
9. Try connecting your phone to a computer
This can help determine whether the phone is still communicating with external devices.
1. Connect your Galaxy to a computer using a USB data cable.
2. Check whether the computer recognizes the phone.
3. If it does, the phone may still be functioning even though the display is black.
Note that file access may require the phone to be unlocked and the USB connection to be authorized. A computer not recognizing it does not necessarily mean the phone is dead.
10. Try using a USB-C mouse
If the phone is operating but its touchscreen or display is unusable, an external mouse may help in certain situations.
1. Obtain a compatible USB-C OTG adapter.
2. Connect a USB mouse to the adapter.
3. Connect the adapter to your Galaxy.
4. If the display becomes visible, try using the mouse to navigate.
This is most useful when the display is faintly visible or intermittently working. It will not fix a completely failed display panel.
11. Check for a display problem after a drop
Think about whether the phone was recently dropped, bent, or exposed to water.
Look for:
- Cracks in the display.
- Flickering before the screen went black.
- Colored lines or unusual patches.
- A display that briefly lights up and then goes black.
A damaged display panel or internal display connector may need professional repair.
12. Try Samsung Recovery Mode #samsunggalaxy
Disclaimer: As an Amazon Associate I earn from qualified purchases.










