How to TEST Any First Alert Carbon Monoxide Detector Alarm (How to Know its Really Working) @HelpingHermit
How to TEST Any First Alert Carbon Monoxide Detector Alarm (How to Know its Really Working)  @HelpingHermit
Uploaded September 2026 | Updated November 2026, 1 day ago
How to test a First Alert carbon monoxide detector
Make sure the detector has a working battery and is properly powered.
Locate the Test/Silence button on the front.
Press and hold the Test/Silence button.
Keep holding it until the alarm begins its test sequence. On the CO400 specifically, First Alert's manual says to hold the button until the LED flashes. The horn should sound 4 beeps, pause, then 4 beeps, with the red alarm light flashing.
Release the button and allow the test to finish.
If it doesn't sound properly, check that the battery is installed correctly and try again. If it still fails the test, First Alert says to replace the alarm.
Don't use these methods to test it

Never use an open flame or vehicle exhaust to test a CO detector. First Alert specifically warns that these methods can damage the detector and potentially create a dangerous situation.

Also, don't stand right next to the alarm while it's sounding—the test is intentionally loud.

How often should you test it?

First Alert recommends testing regularly; its current consumer guidance says monthly, while the CO400 manual specifically says weekly. For a CO400 video, I'd follow the CO400 manual and say once a week.

Disclaimer: As an Amazon Associate I earn from qualified purchases.
How to TEST Any First Alert Carbon Monoxide Detector Alarm (How to Know its Really Working)How to Perform SOFTWARE UPDTE on Any Samsung Galaxy PhoneHow to Fix Verizon Wireless Home Phone LVP2 Connect Base NO POWER (Wont Turn On or Charge 1A77-1210)
Helping Hermit |

How to TEST Any First Alert Carbon Monoxide Detector Alarm (How to Know its Really Working)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER