Uploaded June 2026 | Updated September 2026, 2 weeks ago

---

How to Factory Reset an LG Sensor Dry Dryer
Most LG Sensor Dry bottom-load (front-load) dryers don’t have a true “factory reset button.” Instead, they reset through a power cycle or control reset, which clears glitches, error codes, and frozen displays.
Method 1: Basic Power Reset (Most Common Fix)
Turn the dryer OFF
Unplug it from the wall outlet
(or switch breaker OFF if hardwired)
Wait 1–5 minutes
Plug it back in or turn breaker ON
Power the dryer back on

This clears most temporary system errors.

Method 2: Control Panel Reset
Make sure dryer is ON
Press and hold POWER or START/PAUSE
Hold for 3–5 seconds
Release and wait for the display to reset

(Some models may beep or turn off and restart.)

Method 3: Reset After Error Code (Sensor or Dry Issues)

If you see codes like:

d80 / d90 / d95 (airflow restriction)
tE / tS (temperature sensor issues)

Do this:

Power off dryer
Unplug or breaker OFF for 1–5 minutes
Restart and run a short cycle
Method 4: Control Lock / Frozen Display Fix

If buttons are unresponsive:

Press and hold CHILD LOCK button for 3–5 seconds
If still frozen, perform Method 1 power reset
Important Notes
LG dryers do not store full “factory settings” like phones
Most issues are fixed with a power reset, not a full factory restore
If errors keep returning, it may indicate:
clogged vent system
moisture sensor issues
control board failure
When to Call for Service
Dryer won’t power on after reset
Repeated airflow error codes
Drum runs but no heat consistently
Display stays frozen after power cycle

Disclaimer: As an Amazon Associate I earn from qualified purchases.