Uploaded June 2026 | Updated September 2026, 2 weeks ago

---

How to Change the Temperature on a Whirlpool Oven
Changing the temperature on a Whirlpool oven is usually done by adjusting the Bake setting or using the temperature arrows/knob, depending on your model.
Here are the most common methods.
Method 1: Standard Digital Control Panel
Press BAKE
Enter the desired temperature using:
Number pad, or
+ / - buttons
Press START
The oven will begin preheating to the new temperature
Method 2: Touchscreen Whirlpool Ovens
Tap BAKE
Select the temperature field
Adjust using:
Slider, or
On-screen keypad
Tap START / CONFIRM
Method 3: Older Knob-Control Models
Turn the oven dial to BAKE
Rotate the temperature knob to the desired setting (example: 350°F)
Wait for the oven to preheat automatically
Method 4: Changing Temperature While Cooking
Press BAKE
Enter new temperature
Press START
Oven will adjust mid-cook without stopping the cycle
Important Notes
The oven must be in BAKE mode to adjust temperature
During Preheat, temperature is automatically controlled until it reaches the set point
If the control panel doesn’t respond, check:
Control Lock
Demo Mode
Power reset (breaker off 1–2 minutes)
Calibration vs Temperature Change (Important Difference)
Changing temperature = what you set for cooking (e.g., 350°F → 375°F)
Calibration = adjusting how accurate the oven runs overall
(used if food consistently cooks too hot or too cold)

Disclaimer: As an Amazon Associate I earn from qualified purchases.