Uploaded July 2015 | Updated September 2026, 7 hours ago

---

Sorry if I missed anything. It's hard to build, film, talk and take pictures at the same time.

I'll show you how to build a Lumenier QAV250 the correct way. See this post to see what I mean. fpv-flightclub.com/buy-drone

Watch part 3 of the build before building. It'll show a easier way to mount the ESCs and motors - youtube.com/watch?v=QG5GXBkkl4A&feature=youtu.be

Check out the website to see the correct schematic: fpv-flightclub.com/buy-drone

Chapters:

Intro to parts used: 0:50
QAV250 frame: 11:16
Additional parts used: 16:16
Build schematic: 17:17
Preparing on the ESCs: 21:18
Soldering the ESCs: 26.05
Naze32 orientation: 25:17
ESC signal wire install: 29:15
Install battery cable with wire mesh: 32:35
Solder VBAT: 35:09
Motor wire mesh: 36:04
Motor wire to ESC orientation: 37:46
Solder motor wire to ESC: 39:00
Configure OSDoge 41:38
Connect OSDoge to Naze32: 43:33
Mount Naze32 and OSDoge: 49:00

Parts used in this build

Lumenier QAV250 Carbon Fiber - fpv-flightclub.com/product/lumenier-qav250-carbon-fiber
Taranis X9D - fpv-flightclub.com/product/taranis-x9d-plus
FrSky D4R-ii - fpv-flightclub.com/product/frsky-d4rii
Cobra 2204 1960kv - fpv-flightclub.com/product/cobra-2204-1960kv-motor
Naze32 Acro - fpv-flightclub.com/product/naze32-acro
DYS BL20A pre-flashed with BlHeli 13.2 with dampen light - fpv-flightclub.com/product/bl20a-esc
OSDoge OSD (on screen display, LC filter, 5V for Naze32) - fpv-flightclub.com/product/osdoge
GemFan 5054 Props - fpv-flightclub.com/product/gemfan-5045-props
ImmersionRC 600mw Video Transmitter - fpv-flightclub.com/product/immersionrc-58-video-transmitter
Spironet Antenna - fpv-flightclub.com/product/immersionrc-spironet-antenna
Sony Super HAD 600tvl Camera - fpv-flightclub.com/product/sony-600tvl-camera
FatShark Dominator V2 - fpv-flightclub.com/product/fatshark-dominator-v2-goggle

Soldering vise - fpv-flightclub.com/product/vise

This little $6 tool makes soldering so much easier. Especially when soldering the motor wires to the ESCs: amazon.com/gp/product/B000RB38X8/ref=as_li_tl?ie=UTF8&camp=1789&creative=390957&creativeASIN=B000RB38X8&linkCode=as2&tag=fpvflightclub-20&linkId=P4P76UMGJNVMZLXF

In an attempt to keep this video under an hour I made a separate post on the OSDoge install and setup: fpv-flightclub.com/osdoge-setup-rssi

See this post on how to get CleanFlight and BlHeli Suite (if needed) - fpv-flightclub.com/cleanflight-blheli-oneshot

Check Part 2 of this build - youtube.com/watch?v=l7UHyxLSblQ

Here is a complete parts kit with program backup files - fpv-flightclub.com/product/lumenier-qav250-kit

Custon RTF QAV250 prebuilt - fpv-flightclub.com/product/custom-qav250

For everyone asking, this is my watch - amzn.to/1MrfP8w

If you found this post helpful, it would be super cool if you purchased the components from my store or purchase items from my Amazon links. These posts are expensive and take a loooong time to make so the purchases make it possible for me to keep making them. Thanks in advance, I greatly appreciate it :)

-------------------------------------

Don't forget to subscribe!

Check out our website - fpv-flightclub.com

Like us on FaceBook - facebook.com/fpvflightclub

Follow us on Instagram - instagram.com/fpvflightclub