Uploaded January 2019 | Updated September 2026, 4 days ago
Size doesn't matter anymore! The TBS Unify PRO32 Nano is one of the best VTX TBS has ever made.
Dont confuse the PRO32 with the original Nano. The PRO32 has a physical button and outputs some of the cleanest video I've seen.
Check out the post to see the schematic and setup instructions: fpv-flightclub.com/tbs-unify-pro32-nano-vtx
Chapters:
PRO32 Nano vs Original Nano 1:33
Crossfire SmartAudio VTX Setup 3:20
How to unlock Unify VTX 5:15
Video Test vs Unify RACE 6:40
Highlights:
- 4.5 – 5.5v Input
- u.FL antenna connection
- 25mw, 100mw, 400mw output
- SmartAudio 2.1
- Ultra-clean transmission up to 16 pilots at once
- 13.5 x 15.5 x 3mm
- 1g
The PRO32 uses SmartAudio 2.1 which as of this post is not supported by BetaFlight yet. If you are having issues getting it to work on BetaFlightOSD, this is why it's not working.
You have to use SmartAudio connected to Crossfire or use the physical button to change VTX settings.
Parts used in this build. This build came out to 238g with no props or battery.
FlightClub Neutron - tinyurl.com/y9ahxgmy
Talon F7 Flight Controller - tinyurl.com/y7dg3r5q
Aikon AK32 20x20 ESC - tinyurl.com/y77ch6jt
TBS Unify PRO32 Nano - tinyurl.com/ybz4fgmb
Foxeer Arrow Micro Pro - tinyurl.com/y77og9qa
Lumenier AXii Stubby - tinyurl.com/y7l79ym4
TBS Crossfire Nano - tinyurl.com/yb57aqw8
Immortal T Antenna - tinyurl.com/ydc6s59q
Crossfire Immortal T Antenna mount - tinyurl.com/ycvfvpz7
Crossfire MicroTX - tinyurl.com/y8lc7ojg
GemFan 5149 - tinyurl.com/y76szrsp
CNHL 6s 1000mAh - tinyurl.com/y72vfreb
Tools used in the build:
Soldering Vise - tinyurl.com/yd3oab6o
Gorilla Glue Double sided tape - amzn.to/2MJ9qfP
Weller WES51 Soldering Iron - amzn.to/1Mx2Pxc
Heat gun - amzn.to/2MJ8UhT
This is map my wife got me: amzn.to/2G28HY7
If you found this post helpful, it would be super cool if you purchased the components from my store or purchase items from my Amazon links. These posts are expensive and take a loooong time to make so the purchases make it possible for me to keep making them. Thanks in advance, I greatly appreciate it :)
Tip Jar :)
paypal.me/fpvflightclub
-------------------
Current Quad Setup
FlightClub Neutron - tinyurl.com/y9ahxgmy
EMAX Mini Magnum 2 - tinyurl.com/ydbv8qjv
Foxeer Arrow Micro Pro - tinyurl.com/y77og9qa
Tmotor F40II 1750KV - tinyurl.com/y8bh9p9
TBS Unify V3 - tinyurl.com/ycdtmfbt
Lumenier AXii Stubby - tinyurl.com/y7l79ym4
TBS Crossfire Nano - tinyurl.com/yb57aqw8
Immortal T Antenna - tinyurl.com/ydc6s59q
My Video Equipment:
Main Camera - amzn.to/2SsBabY
B Camera - amzn.to/2SbvZNT
Favorite Tools
Weller Digital Soldering Station - amzn.to/2JngsXg
Dewalt Gyroscopic Screwdriver - amzn.to/2EOwLOq
Anker Powerhouse - amzn.to/2JGbOUz
Don't forget to subscribe!
Check out our website - fpv-flightclub.com
Like us on FaceBook - facebook.com/fpvflightclub
Follow us on Instagram - instagram.com/fpvflightclub
Size doesn't matter anymore! The TBS Unify PRO32 Nano is one of the best VTX TBS has ever made.
Dont confuse the PRO32 with the original Nano. The PRO32 has a physical button and outputs some of the cleanest video I've seen.
Check out the post to see the schematic and setup instructions: fpv-flightclub.com/tbs-unify-pro32-nano-vtx
Chapters:
PRO32 Nano vs Original Nano 1:33
Crossfire SmartAudio VTX Setup 3:20
How to unlock Unify VTX 5:15
Video Test vs Unify RACE 6:40
Highlights:
- 4.5 – 5.5v Input
- u.FL antenna connection
- 25mw, 100mw, 400mw output
- SmartAudio 2.1
- Ultra-clean transmission up to 16 pilots at once
- 13.5 x 15.5 x 3mm
- 1g
The PRO32 uses SmartAudio 2.1 which as of this post is not supported by BetaFlight yet. If you are having issues getting it to work on BetaFlightOSD, this is why it's not working.
You have to use SmartAudio connected to Crossfire or use the physical button to change VTX settings.
Parts used in this build. This build came out to 238g with no props or battery.
FlightClub Neutron - tinyurl.com/y9ahxgmy
Talon F7 Flight Controller - tinyurl.com/y7dg3r5q
Aikon AK32 20x20 ESC - tinyurl.com/y77ch6jt
TBS Unify PRO32 Nano - tinyurl.com/ybz4fgmb
Foxeer Arrow Micro Pro - tinyurl.com/y77og9qa
Lumenier AXii Stubby - tinyurl.com/y7l79ym4
TBS Crossfire Nano - tinyurl.com/yb57aqw8
Immortal T Antenna - tinyurl.com/ydc6s59q
Crossfire Immortal T Antenna mount - tinyurl.com/ycvfvpz7
Crossfire MicroTX - tinyurl.com/y8lc7ojg
GemFan 5149 - tinyurl.com/y76szrsp
CNHL 6s 1000mAh - tinyurl.com/y72vfreb
Tools used in the build:
Soldering Vise - tinyurl.com/yd3oab6o
Gorilla Glue Double sided tape - amzn.to/2MJ9qfP
Weller WES51 Soldering Iron - amzn.to/1Mx2Pxc
Heat gun - amzn.to/2MJ8UhT
This is map my wife got me: amzn.to/2G28HY7
If you found this post helpful, it would be super cool if you purchased the components from my store or purchase items from my Amazon links. These posts are expensive and take a loooong time to make so the purchases make it possible for me to keep making them. Thanks in advance, I greatly appreciate it :)
Tip Jar :)
paypal.me/fpvflightclub
-------------------
Current Quad Setup
FlightClub Neutron - tinyurl.com/y9ahxgmy
EMAX Mini Magnum 2 - tinyurl.com/ydbv8qjv
Foxeer Arrow Micro Pro - tinyurl.com/y77og9qa
Tmotor F40II 1750KV - tinyurl.com/y8bh9p9
TBS Unify V3 - tinyurl.com/ycdtmfbt
Lumenier AXii Stubby - tinyurl.com/y7l79ym4
TBS Crossfire Nano - tinyurl.com/yb57aqw8
Immortal T Antenna - tinyurl.com/ydc6s59q
My Video Equipment:
Main Camera - amzn.to/2SsBabY
B Camera - amzn.to/2SbvZNT
Favorite Tools
Weller Digital Soldering Station - amzn.to/2JngsXg
Dewalt Gyroscopic Screwdriver - amzn.to/2EOwLOq
Anker Powerhouse - amzn.to/2JGbOUz
Don't forget to subscribe!
Check out our website - fpv-flightclub.com
Like us on FaceBook - facebook.com/fpvflightclub
Follow us on Instagram - instagram.com/fpvflightclub
