Uploaded October 2026 | Updated November 2026, 2 days ago
This is part 14 of making a DIY go-kart belt grinder. Today, we’re assembling the platen. The platen's three bolts work like a gimbal to tilt and shift it. I set it just barely touching the belt, since a 1/16" gap is fine, but it should never add tension. Six heavy tacks will hold the work rest bracket without warping the plate. After a coat of Regal Red, adding a shift knob like the original, and a quick tracking adjustment, the work rest is on and square! Tomorrow I'm flipping the switch for the very first time.
If you want to build this grinder and follow along, the plans are available at Fireballtool.com
#fireballtool #tools #fabrication #diy #gokart #wheels #painting #metal #grinding #diyprojects #sanding #assembly
This is part 14 of making a DIY go-kart belt grinder. Today, we’re assembling the platen. The platen's three bolts work like a gimbal to tilt and shift it. I set it just barely touching the belt, since a 1/16" gap is fine, but it should never add tension. Six heavy tacks will hold the work rest bracket without warping the plate. After a coat of Regal Red, adding a shift knob like the original, and a quick tracking adjustment, the work rest is on and square! Tomorrow I'm flipping the switch for the very first time.
If you want to build this grinder and follow along, the plans are available at Fireballtool.com
#fireballtool #tools #fabrication #diy #gokart #wheels #painting #metal #grinding #diyprojects #sanding #assembly










