Uploaded October 2026 | Updated November 2026, 4 days ago
Welcome back to part 7 of this go-kart belt grinder build series. Today I’m working on the flexure and the top wheel axle.
The flexure is a piece designed to bend a small amount, and that tiny bit of movement is what lets me adjust the top wheel and track the belt. I drilled a 1/2" hole for the relief cut, then finished it on the bandsaw in under 20 minutes. The top axle is a 5/8" x 4 1/4" shoulder bolt welded perpendicular to the tube. Accuracy matters here, because if it's off, the belt won't track. Tomorrow I'm building the motor mount, which holds the heart of the machine and makes the shifter lifter work.
Plans for this DIY go-kart belt grinder are available at Fireballtool.com
#fireballtool #tools #fabrication #grinding #diy #diyprojects #motor #metal #gokart #flexure #axle
Welcome back to part 7 of this go-kart belt grinder build series. Today I’m working on the flexure and the top wheel axle.
The flexure is a piece designed to bend a small amount, and that tiny bit of movement is what lets me adjust the top wheel and track the belt. I drilled a 1/2" hole for the relief cut, then finished it on the bandsaw in under 20 minutes. The top axle is a 5/8" x 4 1/4" shoulder bolt welded perpendicular to the tube. Accuracy matters here, because if it's off, the belt won't track. Tomorrow I'm building the motor mount, which holds the heart of the machine and makes the shifter lifter work.
Plans for this DIY go-kart belt grinder are available at Fireballtool.com
#fireballtool #tools #fabrication #grinding #diy #diyprojects #motor #metal #gokart #flexure #axle










