Uploaded November 2020 | Updated September 2026, 2 days ago

---

Building a Double Coax MagLoop Part 1, why part one well that's because I need to buy a Air spaced Capacitor or make one! So this upload is all about the making of the double loop. it is a simple job but you will need some spacers and a lot of time to get it right. there is NO set diameter for the loops I decided on 1M in diameter and ended up with 94cm but it still works so!!!

Parts:

6M of ridged Coax ( something like Andrew Heliax) 15mm
4 spacers (I printed these but you can use PVC Pipe)

Variable Air Capacitor to finish the job

To get notified of the next upload .click that bell and subscribe..


Cheers
Mike M0MSN

Other channels you may like:
G5TM: youtube.com/channel/UCZSapoUEIPcGdSkqCbGtG7Q
Ianxfs: youtube.com/ianxfs
The Radio Prepper: youtube.com/c/radioprepper
TechMinds: youtube.com/techmindsofficial
ZL1BQD - Roly: youtube.com/channel/UCfw8h6oI1xHNrG69bVIZNvg
Matt Dixon: youtube.com/channel/UCfzTFGvX4ElF2ns1M1bxufg
DX Commander: youtube.com/channel/UCEWRZEIjVQB8aUkyUQ-g-zA