atkelar | Grundig 6007 @atkelar | Uploaded October 2023 | Updated October 2024, 12 hours ago.
Grundig 6007 - Workshop Project #27
This one is a rather expensive piece of retro kit: A Grundig 6007 high voltage lab power supply. It is designed specifically for testing tube circuits and I was on the hunt for one for the longest time. They pop up every now and then but usually are either in complete disarray or extremely expensive. I found out later why... But since I really really wanted one, and my birthday was coming up, I treated myself! Well, there goes the rest of the tinkering budget for 2023; good thing I have some backlog.
0:00 Intro / Problem / Device Description
3:45 Damage Description / Disassembly Start / Tubes
5:10 Case / Fuse Holder
6:12 Front Panel / Meter Checkup
7:25 Meter Tuning Description / Meter Problem and Solution
8:44 Meter Mirror Misery
10:18 OpenSCAD Button Replacement / Front Panel and Transformer Disassembly
11:45 Fuse Holder Detail / Chassis Liberation / Chokes
13:22 Dust / Fuse Holder Glue Up / Bent Chassis?
14:22 Paint Job / Filter Caps Gutting
15:50 Tube Sockets / Rectifiers
17:35 Chokes
18:20 Transformers / Mains Switch
19:43 Potentiometers
20:30 Front Panel Assembly / Button Replacement
21:45 Output Capacitors / Filter Capacitors and Issue
23:39 Working! / No Current Meter? / Tube Caps + Pads
24:57 Trimming / Case Closed
25:55 Overview / Credits / Outtakes
Music:
My Train's A Comin'
Unicorn Heads
(YouTube Audio Library)
You can support me on Ko-Fi: ko-fi.com/atkelar
and also on Patreon: patreon.com/Atkelar
...and since a month, you can also drop a virtual coin into the YouTube hat by using the "Super Thanks" feature!
Thanks to everybody who signed up already!
Grundig 6007 - Workshop Project #27
This one is a rather expensive piece of retro kit: A Grundig 6007 high voltage lab power supply. It is designed specifically for testing tube circuits and I was on the hunt for one for the longest time. They pop up every now and then but usually are either in complete disarray or extremely expensive. I found out later why... But since I really really wanted one, and my birthday was coming up, I treated myself! Well, there goes the rest of the tinkering budget for 2023; good thing I have some backlog.
0:00 Intro / Problem / Device Description
3:45 Damage Description / Disassembly Start / Tubes
5:10 Case / Fuse Holder
6:12 Front Panel / Meter Checkup
7:25 Meter Tuning Description / Meter Problem and Solution
8:44 Meter Mirror Misery
10:18 OpenSCAD Button Replacement / Front Panel and Transformer Disassembly
11:45 Fuse Holder Detail / Chassis Liberation / Chokes
13:22 Dust / Fuse Holder Glue Up / Bent Chassis?
14:22 Paint Job / Filter Caps Gutting
15:50 Tube Sockets / Rectifiers
17:35 Chokes
18:20 Transformers / Mains Switch
19:43 Potentiometers
20:30 Front Panel Assembly / Button Replacement
21:45 Output Capacitors / Filter Capacitors and Issue
23:39 Working! / No Current Meter? / Tube Caps + Pads
24:57 Trimming / Case Closed
25:55 Overview / Credits / Outtakes
Music:
My Train's A Comin'
Unicorn Heads
(YouTube Audio Library)
You can support me on Ko-Fi: ko-fi.com/atkelar
and also on Patreon: patreon.com/Atkelar
...and since a month, you can also drop a virtual coin into the YouTube hat by using the "Super Thanks" feature!
Thanks to everybody who signed up already!