Uploaded January 2025 | Updated November 2026, 3 hours ago
By using a bluetooth controlled power plug, and new firmware on our upcoming Half Decent Scale, we're able to modify our Niche grinder to be a "grind by weight" grinder.
This same modification will work on any grinder which has simple electronics: just an on/off switch, and also which doesn't grind too quickly.
In this demo, we ground 0.3g too much, and the next iteration of the scale firmware will plan for that slight delay between stopping the power to the grinder, and a bit more grounds coming out.
Note that we've also modified the Niche to use a hopper with a 3D print modification.
By using a bluetooth controlled power plug, and new firmware on our upcoming Half Decent Scale, we're able to modify our Niche grinder to be a "grind by weight" grinder.
This same modification will work on any grinder which has simple electronics: just an on/off switch, and also which doesn't grind too quickly.
In this demo, we ground 0.3g too much, and the next iteration of the scale firmware will plan for that slight delay between stopping the power to the grinder, and a bit more grounds coming out.
Note that we've also modified the Niche to use a hopper with a 3D print modification.







![How to replace the DE1 wand with the BengleWand on V1.1 DE1 models
In this video, we guide you through the process of replacing the original DE1 steam wand with the new BengleWand on v1.1 Decent Espresso (DE1) models.
Chapters:
[00:08] Tools required
[00:12] Powering down & preparing the machine
[00:41] Removing the main cover
[01:01] Disconnecting and removing the DE1 steam wand
[01:27] Removing the flow meter and bracket
[01:57] Removing the tube from the uptake pipe
[02:11] Connecting the pump tube
[02:21] Preparing and routing the new steam tube
[02:43] Installing and securing the BengleWand
[03:06] Connecting the tube to the wand & Final Lock
[03:20] Contact us if you have any questions
If you run into any difficulties or have questions during the replacement process, please feel free to reach out to us directly through our tech support channel. How to replace the DE1 wand with the BengleWand on V1.1 DE1 models](https://i.ytimg.com/vi/X3H9ouvUyvo/mqdefault.jpg)


